Fuenches weave from a variety of materials. They can serve Moulin and skin, threads, yarn or beads. But satin ribbons are considered the most appropriate material for weaving. Such a bauble can weave without much difficulty in literally in minutes without spending effort. In addition, the variety of weaving methods will make the decoration unique. They are worn not only on the wrist, but also use both key chains, jewelry for brooches and in every way differently.
1
The most common and simple is weaving from two tapes. For him, we will need two tapes of different colors, each meter each. You should not forget about the color combination, because the wrong selection can kill all the beauty of the future decoration. We will take the combination of orange and green as the most bright and attractive look. Before you begin weaving, you need to bend the edge of the green ribbon, wrap it with an orange ribbon and tighten the nodule by making a live loop. In the process of weaving it can be tightened if this desire arises. Now it follows the orange tape into the loop, then turn another loop into it, folded from the green ribbon, and slightly tighten. When the orange ribbon loop becomes more, put in it green and dressed in orange. Repeat this action until the phenuska becomes long enough. After that, the free ends should be knotted and wear on the wrist or bag.
2
Some baubles can be so magnificent that they would not be ashamed to decorate the festive outfit. Such an accessory can be soiled from four tapes. For weaving, there will be four tapes about two meters long, and a width is five or seven mm. Mind fifteen centimeters of each ribbon and in this place we will connect them into the nodules, then we will create at the right angle to each other and proceed to weaving. One of the tapes, light, flexing the bottom, forming a loop. Now it needs to be blocked by a brown ribbon, bent it left. Then overlapping brown tape with light, bending it from bottom to top. The latter, orange ribbon you need to push in a loop from light. Now all the loops must be pulled, forming a square. This procedure can be repeated as many times as it is necessary that the bane reaches the desired length. The advantage of this product is that it does not have an invalid side and can be worn as in its original form and twisting in the harness.
3
Round bauble, woven from tapes, is an adapted version of Indian bracelets due to its rigidity and ability to keep the form for a long time. For weaving, two ribbons are needed - light and dark, they should measure nine centimeters and tie, fixing the nodule with a pin. Then a dark tape in the form of an arc above the light, lying horizontally. Then the bright ribbon must be folded the archer over the dark, bending from left to right. We get two arches perpendicular to each other. Free end of the dark ribbon. Bend on top, making an inverted arch over a light ribbon. The remaining end of the bright ribbon bent to the left so that it passes not only over the dark ribbon, but also from the bottom, under it. Now you need to tighten the ribbons into the node, carefully straighten and tighten the knot is stronger. This must be done until the phenuska becomes long enough. It can be used not only as decoration, but also as a rim or a pen of a children's bag.
These are just the most common ways to create these simple jewelry, leaving their history in ancient times. Their creation does not require painstaking labor or long sitting in an uncomfortable posture, and therefore they are so popular. How to properly pick up the colors of ribbons, how to fix the baubles and from which they can still be cooked, you can also find out in club Soviets.
0
1275
