The preparation of food is associated with the release of vapors and fat, which settles on the surface of the hood. Over time, the case of this device becomes sticky, and the air suction force decreases. To restore the performance of the drawing and return it to the initial look, you need to wash the device.
1
Several ways are used to clean the drawing. To choose the most appropriate, appreciate the degree of pollution. If you recently purchased the device, simply wipe it with warm water with a dishwashing agent. Be sure to remove the filters and rinse them in hot water. If you have noticed a yellow sticky flare on top on the metal grid, you will have to fight with radical methods.
2
Type in a straight line and add to it 1 tablespoon of salt and soda. Pour a few drops of dishwashing tools and put the container on fire. Immerse the filters into the solution and boil them 15-20 minutes. After that, get metal grids and allow them to cool. Rinse products in running water. Filters must acquire their original appearance and to become a silver color.
3
If this method did not give results, type a little water in a bathroom and dissolve several spoons to clean the pipes in it. An ordinary mole is suitable, but you can purchase a more expensive foreign substance. Put the filter in the bathroom. And leave it for 1-2 hours. During this time, the entire coolant will go away from the surface, and cells will enlighten. Accordingly, the exhaust work will improve.
4
After you have successfully coped with filter cleaning, be sure to wash the housing of the hood. In no case are not a metal scraper, scratches can remain scratching, in which fat will be clogged. In addition, it will spoil the appearance of the device. You can prepare a special paste of soda and liquid soap. Apply a paste on the washcloth and spend it the case of the device. To give the brilliance of the body, spray it means for washing the glasses and wipe with a soft cloth.
5
If the fat droplets remained after cleaning, wipe them with a plastic scraper, do not use a metal cleaner. Excellent copes with contaminants anti-rigor or milams. Using them, be sure to put gloves, these substances can eat skin. You can try to moisten the napkin with hot water and pour into it the salt of fine grinding. Wipe this paste the most dirty places.
6
Cleaning the drawing filters is recommended once a month. During this time, they are usually not strongly polluted, and remove fat is possible without the use of boiling and special agents containing acids and alkali. Now there are expensive SIF or comets, but you can purchase domestic liquids. They stand several times cheaper and are no less effective.
If you have seen a divorce after cleaning, try to delete them using a means for washing windows with alcohol. Just apply the substance to the surface and wipe the cloth without a pile. If you do not have such a product, even before drying the metal, wipes it with a cotton towel.
0
1759
