How to treat mold cellar

For basement owners, the problem of the presence of mold is a relevant problem. There are various methods to combat such a problem that we are in detail today and consider.

1

Fighting mold

It is clear that the basement is the place where the probability of the appearance of mold is high as much as possible, so when such a problem appears in this room, no one is even surprised. The main reasons for the appearance of such a problem is:

• high levels of humidity
• bad ventation room
• lack of
• long storage in the basement of various products
• the presence of condensation
• the use of wood that has become a source of propagation of fungi

It should be noted that if you do not struggle with such a problem. It will spread, and also do not forget that mold is very dangerous for products and for human health, so it is impossible to inactivate in any way.

Mold extends very quickly and as soon as you noticed the first signs of mold on the walls in the basement, immediately need to take measures to combat her. The appearance of the walls when they have mold - not very beautiful, but this is not the strangest. You need to be afraid of mold dispute, which penetrate the respiratory tract to the human body.

The first signs of the appearance of mold in the basement are as follows:

• fine air indoors
• accumulate drops on the ceiling

2

Molding methods

At the moment, there are many ways to combat the problem under consideration, each of which has several advantages. The most important criterion for which it is necessary to choose this method is the duration of the effect from the selected event. We will understand in detail in the existing methods of struggle.

Disinfection:

• This kind of method is really effective, but it does not solve the whole problem, that is, if you spend disinfection, the next step that should follow this is to improve waterproofing and ventilation.
• To carry out this operation you will have to free the basement from all over.
• Now arm the iron brush and go through it thoroughly on all walls and ceiling.
• All shelves that are in the basement necessarily need to be pulled out from the basement and dry, and very good.
• After the processes done, it is worthwhile to disinfect surfaces in the basement.
• In the event that in the basement the floor from the ground, mandatory you need to remove the top layer, because the mold is distributed on it.
• Effective tool in this procedure will be the use of sulfur checkers.
• No need to forget that before disinfection, do not forget to block all the ventilation outputs.
• You take a small piece of sulfur, set on fire, and immediately leave the served, the door or hatch should be closed tightly.
• After 12 hours, you need to open all the ventilation outputs, doors (or hatch) and spark a good room.
• After that, it will be necessary to handle the walls of lime.

If this method is not suitable for you for some reason, then you can use another way for which you will need the following components:

• lime (chlorine)
• formalin
• water

We mix all these ingredients, mix thoroughly and spray with such a means of the wall and other basement surfaces.

Your attention is given another method of getting rid of mold, which is as follows - Mix:

• 20 liters of water
• Copper vigoros - 100 g
• Gaured lime - 1 kg

This solution can also be treated with walls, and gender, and racks in the basement. Also, this method of processing is also prophylactic, so excess, it will definitely not be. Among other things, a deactiv solution diluted in warm water can also be used in the objectives under consideration.

If you only decided to build your basement, and are afraid to do something wrong, so that the mold does not attacked this room, it is better to immediately worry about proper waterproofing, because this factor is sometimes decisive in the absence of mold. Do not forget that it is necessary to ensure waterproofing in the basement, both outside and from the inside.

Outside, you must ensure that the drains pipes are derived as expected, as well as the slopes on the porch were also made, otherwise there can be no good waterproofing, even talk can not be.

Inside, too, everything should be done qualitatively:

• First, the premises necessarily dry
• Then get rid of all parts that can easily be satisfied with the walls, ceiling and other surfaces in the basement.
• The next stage - we close all deformations on the walls, slots between the ceiling and floor, etc.
• When all surfaces in the basement are smooth and without any deformations, now you can proceed to process. For these purposes, antifungal agents are often used, which will be reduced by times the likelihood of molds in the basement.
• Do not forget that another reason for the appearance of the troubles in the basement is the flooring or absence of its absence. It is for this reason that it is necessary to regularly monitor the condition of such a coating:
• If the gaps appeared - immediately smeared them
• If there are some deformations on the floor - promptly get rid of this trouble

In order for moisture to be formed on the floor, it is desirable to process the coating with a clay (one can also use other materials of moisture-resistant type for these purposes).