Mold in the refrigerator how to get rid of

If the refrigerator does not work for a long time and is closed, then mold appears in it. It may happen after winter when the unit stands on a not heated dacha. It is necessary to get rid of mold immediately as soon as it was noticed so that its smell would not fit into the products being loaded into the refrigerator.

Buy a special means to remove mold in the store. Today, many manufacturers produce them, and they are sold in household chemicals. Pay attention to "Mr. Muskul", "Sif", Sillitis, "diabacket" or other similar. Carefully examine the inscription on the bottle, is it possible to use a specific means in places where products are stored. Before applying a special tool, all parts of the refrigerator wash with soda mortar and dry well. Dry the soda in warm water and take two tablespoons on one liter of fluid.

Suppose that in the village where your cottage is located, there is no household chemical store. Then remove the mold in the refrigerator folk methods:

Remove all shelves and trays out of the refrigerator.
Fold them in a large pelvis and pour with a warm soda solution.
With the help of the brush, carefully remove the places of mold from all surfaces.
Wash the inside of the refrigerator with the same solution.
Dry shelves, trays and camera with a typical hairdryer.
Dry surfaces wipe 6% vinegar and let it dry by naturally.

When washing the refrigerator, its drying and treated with vinegar do not forget about the sealing gum on the door. It is in the recesses of the gum mold accumulates most often. For her wash, take the old toothbrush.

It is desirable to irradiate the fridge and its internal filling with a household ultraviolet lamp. There are such lamps in many families - they are used for quartzing of premises and a home tan.

Conduct processing in this way:

In the already washed and clean refrigerator insert the dry shelves that put trays. Glass shelf over containers for vegetables, remove and put next to the fridge.
Direct the lamp emitter to the open refrigerator, setting the lamp at a distance of 1.5-2 meters from the irradiated surfaces.
Set the timer of the time "30 minutes" and turn on the lamp into the outlet.
After the audio signal, turn off the lamp and give the refrigerator to stand open 2-3 hours.

When using UV lamps, work in protective glasses that go to it complete.

No matter how hard you try to get rid of mold in the refrigerator, your works will be in vain if you do not pay attention to the drainage tube and pallet. Through the tube condensate from the refrigerator enters special capacity above the compressor or in the pallet. It is in these places that is always very humid and there is practically no circulation of air - ideal conditions for the growth of mold fungi. Processing the camera with a refrigerator from mold, move it away from the wall and do the same with the pallet and tube.

To prevent the appearance of mold in the refrigerator, do not keep missing and disgusting products in it. Once a month, wash the refrigerator with a neutral detergent or soda solution, after which it seems well. For prevention purposes, put a few Silica gel bags inside the refrigerator. Packages with this absorbent moisture tool are in all boxes with shoes and in the pockets of new women's bags.