High-class machines are often equipped with onboard computers that contain a lot of information and help in driving a car. Such a computer is equipped, for example, BMV brand cars. However, sometimes it is necessary to reset the data of onboard computers already during the operation of the car - fully or individual services. To do this, it is quite necessary to contact the service center, all actions can be made independently, as they do not make care.
1
The description of the resetting data process of the on-board computer is contained in the instruction manual of the car, however, if you have no such instruction, or it is lost, you can seek help in a car service or use the instructions from the Internet.
2
Sit into the car and insert the key in the ignition without turning - just so that the lighting on the front panel is lit, while not pressing any pedals. The gearbox should be in the position - neutral for mechanical gearbox and parking for the machine. Do not start the car, just press the button - while the light panel lights up on the panel.
3
Next, click on the daily reset, delaying pressing for a few seconds - when the service icon lights up, let go. You can choose any service of the on-board computer and reset only its data, and you can reset all the parameters immediately if necessary. With a short press of the daily reset button, the service will be changed - the corresponding picture will tell you about it, the Reset function will appear with a long pressing. When "Reset?" Appears on the scoreboard, release the reset button, and then press again and hold down until the inscription disappears, and the data is not reset.
4
If you need to reset absolutely all the on-board computer data, you can proceed differently. Find the onboard computer data zero button - often it is on the handle on the right or left of the steering wheel, which also controls the janitors of the car. Get the car, press and delay the data reset button for a few seconds. When the menu is lighting up on the BC, select "An Values" and reset the data on the fuel consumption to zero, the average speed of the car and time on the way.
5
Having dropping all the on-board computer data for a while, fix pressing the RESET button. After that, it is necessary to turn off the battery for a while - there will be enough ten-fifteen minutes. After that, all the on-board computer data is reset. Connect the battery and check that all data was reset.
Reset settings and data on BMV onboard computers is fairly simple and easy. However, if you are not sure about your abilities, you can call in a certified service center, and you will reset all settings for 5 minutes, and also show the correct sequence of actions so that you can continue this procedure yourself.
0
1076
