Updating firmware in the navigator may you need in a few cases. First, if the factory firmware "flew" and the device refuses to load. Secondly, if you want to improve or speed up your navigator. On how to do it is simple and safely written below.
1
Before starting the process of flashing your device to fully charge it. If the battery sees during the firmware, then the likelihood that you will never be able to run it will be excluded. Therefore, it is necessary to flash the devices only after the full charge of the battery and when the power is connected.
2
Use only verified firmware - the firmware from an unknown author may permanently deprive your health device. Also remember that there are no universal firmware for navigators. Firmware from another device, even if it is very similar to your characteristics, can kill your navigator forever, since the "iron" filling is very dependent on the software installed. Only one incorrect file can lead to a complete loss of the gadget performance.
3
In order to flash the navigator, write down the file with the firmware on the memory card. Use the maximum volume card that your navigator supports. Better use the flash drive of at least 2GB, this place is enough to record all the necessary data on it. Before recording files, do not forget to format it in FAT or FAT 32 format.
4
After all the necessary data is recorded - install the USB flash drive and reboot it. After rebooting, the firmware of the device will begin. Most often, the external manifestation of the firmware process, which you can see - the percentage band, which is filled in as new data is recorded in the memory of your device. In some cases, together with the lane, the text describing the stages of the firmware may appear on the navigator screen.
5
Some models of navigators in order to start the firmware process, you must boot in a special menu. In order to download it - click the desired key combination at the very beginning of the device loading, this combination depends on the manufacturer of your device.
6
After the navigator firmware is complete - turn it on. After that, remove the flash card from your navigator and erase the firmware files from it. Write down on the card flash drive for the navigation program and set back to the navigator. Run the device. The first launch can occupy for a long time. Do not worry - this is due to the fact that the system unpacks the files necessary for operation. If the device is loaded, but the software shell is in the non-Russian language - simply change it in the settings.
If you follow this instruction, you can quickly and safely update the firmware from your navigator, which will allow you to take advantage of more productivity and additional features of your device.
good day. Not only, but only the map of Russia. They disappeared the other, after the update, they disappeared. Now the route leads, asam I can not pave the route, only reservoirs show what to do on the map?
0
4580
the navigator is turned on, but navigation does not turn on. The power buttons work. What to do?
good day. Not only, but only the map of Russia. They disappeared the other, after the update, they disappeared. Now the route leads, asam I can not pave the route, only reservoirs show what to do on the map?