In order to protect the car from the hijacking, its owner acquires alarm, which will notice the possible robbery on time. One of the most reliable and proven anti-theft devices is the Starline system. Using the alarm keychain, you can block the doors, whether the engine engine is turned on and so on. In our article we describe in detail how to set up time on such a key chain and why it is necessary.
Instructions for setting time
The manufacturer advises to set the correct time on the STARLINE key chain, because using such settings you can activate the necessary features of the anti-theft system at exactly the specified hour. For example, you can set the time to make the car and the engine began to warm up. The attached time setting instruction may differ slightly for different stroke models Starline. On our example, we will look at the A91 model setting.
- 1 step - on the top panel of the block, hold the button 5 seconds (as an asterisk is indicated), wait until the device will make 3 short, melodic sound and its screen will light up;
- 2 step - when the digits flash on the device, this means that you have successfully switched to the Time Settings menu;
- 3 step - make a click key number 3 and start setting up the clock designations (you need to perform the clock setting using the number 1 (increases the digital designation) and buttons number 2 (lowers the digital designation);
- 4 Step - Briefly press the number 3 button to fix the clock and go to minute settings;
- 5 Step - Install minutes using the buttons number 1 and No. 2;
- 6 Step - To fix the time setting on the Alarm Remote Control, you do not need to click on the 5 seconds buttons (if you pushed the button back to the settings menu).
For newer keyfob models, to go to the temporary settings menu, you need to press the number 4 button and then set the exact time by driving the buttons on the top panel of the device.
Configure alarm and timer
If you need to install autorun by car, then follow the time setting, you must configure the alarm clock on the device. It is very simple:
- 1 step - set the clock, as indicated in the first partition section of the article and press the number 3 button (the numbers must be filled);
- 2 step - set the alarm clock, adjusting their accuracy with buttons No. 1 and No. 2;
- 3 step - gently press the number 3 button on the sidebar of the device to go to minute settings;
- 4 step - minute alarm setting in a similar way, like a clock;
- 5 Step - To complete and save the settings made, you do not need to make any clicks on the buttons (approximately 3-5 seconds) until the device screen is turned off
If you want to install a timer, then immediately after installing the alarm, you must press the number 3 button and set the desired timer time, controlling the buttons No. 1 and No. 2. All settings will be saved automatically if you do not click on the keys until the screen is "woozy."
Sometimes, even after setting the time and save all changes, the clock can be shown incorrectly. Then the motorist needs to pay attention to the state of the battery and replace it with a new one.
0
561
