How to disable Starline Alarm

Stopped working the key chain of auto alarm? Broke or lost keychain? Alarm does not respond to keychain? Can I be able to remove the car?

1
How to disconnect the alarm Starline - what to do?

To disable auto alarm without keychainYou will need the VALET button. It is usually installed near the driver's fuse block, behind the plastic protection, near the windshield, in the kick panel, sometimes in the glove compartment or on the shock sensor wire. Competent masters always report the driver about the installation site. If you failed to find it - contact the car service.

2
Turn off STLINLE A1, A2, A4 24V signaling keychain

The sequence of actions to disable the security mode depends on the installed mode of operation of the function number 5. There are 2 options for the development of events:

The inclusion mode is activated without the need to enter a personal code.
Open the door key. The alarm is activated, accompanied by flash outbreaks. You have total 20 seconds to turn on the ignition and clap the Valet button three times. You can turn off the ignition, this will lead to the fact that the protection mode will turn off, and the engine will be unlocked.
The trip mode is activated by entering the personal value of the VALET consisting of only 2-digit.
Open the door key. There are 4 outbreaks of dimensions and a 20-tech counting will begin. During this time you must have time to open the door, as well as turn on the ignition. Press the VALET button several times (the exact number is the first digit of the personal code). Disconnect and turn on the ignition. Now press the VALET button again (the exact number is the second digit of the personal code). You can turn on the ignition. If you entered the code correctly, the security mode will turn off. Confirmation of success will be a double flash of dimensions.

3
Turn off Starline A6 alarm

To urgently disable the security mode (non-working keychain or you lost it), you will need to enter a identifying code using the service button and the ignition lock.

Using the key, open the door. Alarm is activated.
Do not start the engine turn on the ignition.
You must have your own personal code from alarm, press the VALET button the required number of times (the first number of your code).
Turn off and turn on the ignition.
Click the Valet button again, now orient your code in the second digit.
Turn off the ignition. All, alarm is disabled.

4
Turn off the alarm Starline A8, A9

To urgently disable the security mode without keychain Alarm, it is necessary:

Using the key, open the door. Alarm is activated.
Do not start the engine turn on the ignition.
You have only 20 seconds to have time to click on the Valet button as much as 4 times.
Turn off the ignition. If you do everything correctly, two outbreaks of the dimensions and a double siren signal will follow.
If the automatic switching on the security mode is programmed on your alarm, by running the last item, turn on the ignition for another 10 seconds and turn off. If not to do this, then the car's protection mode will turn on automatically.

5
Disable Starline Moto V-5 Alarm

Protection mode is disabled without keychain By this algorithm:

Make so that the alarm has worked. Wait until the audio signals are disconnected. You have 3 seconds to enable and turn off the ignition 3 times. For a short time, the LED indicator will light up, this is a signal that you have successfully completed the first step to emergency disabling the security mode.
Wait until the LED indicator goes out. Now you have 5 seconds to enable and turn off the ignition 3 more times. As confirmation of the successful disconnection of the protection regime flows 2 sounds. The LED indicator will turn off. The engine is unlocked.

Note, if you turn on the ignition while the LED indicator lights up, this will break the protection mode procedure, and the procedure will have to be reused.