How to apply a veil

Not everyone for pocket to equip a parquet of red wood at home. But you can give the outdoor coating of a noble shade, repainting it under the expensive, elite wood breed. This is carried out by tinting with the composition of the composition, which is called the vengeance.

The simulator is a liquid with toning properties, due to which the wood acquires a shade that is not peculiar to it. When applied, a film is not formed on the surface. It penetrates inside, changing the color of the parquet, but without hiding at the same time texture of the tree and not degrading its properties. Thus, the pine floor can be visually "turning" into nuts.

Morons for staining wood differ, depending on their composition:

Water. Received the greatest distribution. Capable to give the material any color, ranging from light to dark red. There are liquid, that is, ready for use, and in the form of a dry powder, which needs water dilution. The lack of smell is a big plus, but at the same time be prepared, which will dry the aqueous veils for 12-14 hours. In the process of applying, some inconvenience may arise, such as raising the pile of wood, which can be eliminated by subsequent surface grinding. Water acrylic veneers are characterized by good properties, which are resistant to fading and washing, but are characterized by a high price.
Alcohol. These are solutions of dyes of various kinds in alcohol. After the makeup applied, the alcohol evaporates, and the pigment penetrates into the wood, painting it. The process of tinting occurs very quickly - for half an hour. Therefore, appropriate requirements are put forward to the application procedure: it is necessary to paint quickly to avoid erosions and stains. To achieve perfect uniform color, use the paintopult.
Nitomoril. Such compositions are manufactured based on solvents. If you characterize their specifics, they are similar to alcohol, as they need a rapid application and require the use of a sprayer.
Oil. In this case, the coloring substance is dissolved in oil, as a rule, flax. When staining the fiber wood do not rise. High light-resistance in painting pigments is inherent, that is, painted wood over time does not lose its brightness. You can use different tools for applying oil veils, whether it is a rag, a brush or a paintopult. The time for which the veil dries up is 2-4 hours.

It is important to properly approach not only the mind of the veil, but also to its color. Each label has a cipher and the name that reflects the breed that mimics the composition is "Red Tree", "plum", etc. However, it is unreasonable to navigate only on the inscription, since the colors of the veneer from different manufacturers differ, even if they are produced under one cipher. Therefore, pay attention to the samples of Morilok, exhibited in construction stores. Also, take into account the form, texture and color of the original surface, which will be covered by the veneer, depends on this degree of staining.

Next, you should decide on the work tool:

Kraspopult, the size of the nozzle of which is no more than one and a half millimeters;
Brush, its width must reach 100 mm;
Rag;
Tampon made of foam rubber.

When processing a large area, working with alcohol and nitromorils is better to choose the spray gun. For water and oil compositions, other tools are used. Brushes made from natural bristles - the best solution for oil veneers, from synthetic - for water-soluble.

It is preliminarily recommended to check the moron for color matching. Trial scree is required to analyze the conformity of the simplified surface, to find out how much layers need. To do this, take a polished, squeezed apartment from the same breed as the main wooden surface, and apply one layer of the veil. Wait for drying and make a second layer, about 2/3 of the sample space. By analogy, the third layer should be covered only 1/3 of the board. From above, the surface should be covered with varnish in 2 layers. Thus, you can compare the intensity of different coloring options and decide how many layers you will need. You can make several trial paintings using different types of verse.

Preparation of a wooden surface to apply a verse is as follows. An old coating, if any, remove, perform the cycle of the boards, and also polish them. On the surface there should be no stains that have fat and oil origins. To remove them, wipe the White Spirit area with a vet. Also for this will fit gasoline. If the floor is made of coniferous rocks, it costs it to desocal, because the resin interferes with the veil to the normally absorb.

For desonylation, you can prepare a special solution:

Heat 1 liter of water to 60 degrees, pour potassium carbonate there, it will take it 50 g. It is also necessary to add 60 g of soda calcined.
Or dissolve in water 50 g of caustic soda.
Mix distilled water in an amount of 750 ml and acetone. The last takes 250 g.

Apply the liquid on the boards, it is better to treat the surface several times. After 30 minutes, rinse the surface with warm water.

Now we have come to the main issue and consider step-by-step technology of making veils on the wooden floor:

First, a little warm the substance to enhance the penetration of the composition into the structure of the tree.
When wetting the tool in the mourner, do not allow the rag or brush overly moistened, in order to prevent the flows and uneven coating.
If you use a sprayer, pour the tool into a special tank.
When applying the veil, it is necessary to work along the fibers, quickly. It is impossible to take breaks, as this can provoke the occurrence of stains.
But if the drips still appeared, the floor should be wiped with a soft cloth. The liquid will stretch along the fibers.
Leave the surface to dry it.
Similarly, make a few more layers to achieve the desired shade. As a rule, two or three.
At the final stage, parquet is covered with varnish. Also make several layers, squeak the surface every time, using fine-grained grinding paper.

Thus, the technology of applying vehicles is simple and understandable to any owner. To secure the knowledge gained, we recommend familiar with the video roller.