How to mount Balasins

The correct method of fixing the balasine is chosen on the basis of the design features of the staircase and the material of the manufacture of bearing elements.

1
General Rules for Montage Balyasin

Reliable exploitation of the staircase ensures compliance with the requirements:

The maximum distance between balasines is 150 mm.
The height of the racks together with the railings is at least 80 cm.
Balaasins should be fixed at least two points.
The thickness of the support should correspond to the calculated strength.

2
Required tools

To secure the balasine, you will need:

Drill;
Tree drills;
Hacksaw;
Keys;
Brush;
Measuring tool;
Sucks or studs;
Glue.

For vertical drilling of the planting holes, it is desirable to use the guide prefix for a drill.

3
Installation Balasine on Metal Fasteners

There are several typical assemblies of wooden racks by means of steel screeds:

On the heel with a diameter of 8-12 mm and a length of 80-140 mm inserted into the deaf hole of the lower end of the baluster and the upper plane of the stage.
On the "Glukhar" - a special screw, tightened into the rack through the step.
On a bolt passing inside a baluster and a fixed nut through a cut-out recess, closed with a decorative insert.
On the self-drawing, the overhead racks attached to the side of the Kooowar or the taisle are installed.
On the concrete base of balusters are mounted using anchor bolts or shock dowels.

TO perilam Vertical supports are fixed with braces, spiked connections or protracted eccentric.

4
Fastening a balaasine of wood on the sewage

For installation, wooden rounded pins are used, selected depending on the size of the lower part of the baluster - a thickness of a quarter, and a length of at least two diameters.

Installation order:

Place the location of the baluster on the step.
We have a hole with a thin drill.
Expand the deepening of the relevant diameter peroil.
The same method drill a hole in the support portion of the baluster to the depth of the sewage.
After checking the connection "on the dry", purify surfaces from dust.
Apply the glue, install pin and baluster.
Withstand the required time to set the strength of the connection.

5
Mounting metal balusin

Stair fencing from the factory manufacture metal comes complete with the necessary fasteners. It can be brackets, hinge or flanges that have a complete appearance or hidden decorative linings.

Reliable fastening of the balossine is ensured by using threaded, screw or adhesive compounds, as well as their combinations. Use nails in fences stairs not allowed.