How to reduce the sensitivity of the alarm

Neighbors have already begun to look at your side because of the constantly triggering alarm by car? You yourself are tired of constantly twitching and check if everything is in order with the car? Sometimes the alarm is triggered not only when the car is trying to open or hurt, but also from passing large cars running past the boys or even from loud sounds, such as the hum of the flying aircraft or a small salute. Then, it is possible to change the alarm settings and reduce its sensitivity and susceptibility.

Try to find a shock sensor in the machine yourself. For different models, the installation is made in different ways, but most often the sensor is located at the bottom of the pedals or under noise insulation. It is best to explore the instruction attached to your alarm model. But you can also try to determine the location, sowing into the car and using the alarm.

After you find the sensor, check whether it is attached. If he joins close to the steering wheel or straight on the iron surface, then the car will react to each touch. Change the location of the sensor.

But most often the alarm settings are initially aimed at high sensitivity, so change them using the controller on the shock sensor itself. Do not reduce the sensitivity to the limit. The fourth or fifth levels will be the most suitable.

The wiring leading to the sensor may be faulty, or can jam the sensor itself, say after entering it water. Eliminate the problem or refer to the specialists.

On some models, the sensitivity is adjusted by a signaling keychain, here you need to refer to the instructions.

When setting the sensitivity, do not reduce the level at all. Otherwise, the automotive alarm is simply lost its relevance - protective ability. Adjust it optimally. So you and your neighbors will be satisfied, and your car is safe.