How to make a tank made of cardboard?

Now we will tell you how to make a cardboard model of the German heavy tank Tiger 2 of the game World Of Tanks.

1

What is needed for the production model?

we need to manufacture it:

• glue gun,
• stationery knife,
• scissors,
• ruler,
• compass,
• pencil,
• tweezers,
• and cardboard 2 and 4 mm thickness.

2

The assembly starts with a body

• We begin to assemble the frame.
• The cardboard parts are fastened by means of hot glue.
• Details on the templates and cut clothes patterns here: https://ru-wotp.wgcdn.co/dcont/fb/doc...
• When assembling it should be noted that the hot glue cools down fairly quickly, so it is better to put the parts as needed.
• The glue in the base ribs to design not myalas.
• Also, if you glue bonding falls not to the right place, it is better to remove at once, until it is completely frozen.

3

The side wings

• Putting side wings, which will lay the tracks above. If you need to bend a piece of cardboard, it can be cut from the wrong side office knife.
• Glue the wings to the body ready. If the item has turned out more than you need, it can be neatly trimmed office knife.
• Details better to be numbered, then you do not get stuck in the assembly.

4

Small parts

• Glue the lower part of the tower.
• We begin to fill in fine detail the front part of the hull. Available online 3D tank model and looking at it, cut small parts.
• Paste the details on the back of the tank. For bonding small parts it is very convenient to use a pair of tweezers.
• The barrel machine gun can be made from small paper tubes.
• Next, attach the small details in the turret. To cut a small circle punch easy to use.

5

Trucks and exhausts

• Glue truck to the tower. For the manufacture of shoe, which are glued to the tower, with a corrugated cardboard needed to remove the top layer.
• We glue parts to the feed of the tank. The more small neat details you add, the more interesting and it will be more difficult to look like a model as a result.
• For exhaust pipes, thin bamboo sticks can be used.

6

Gun and wheeled blocks

• We stick items on the sides of the tank.
• The cannon can be made of a cardboard tube, and screwed up the layers of cardboard on it. Stick it to the tower.
• Next, cut out and glue wheels for the wheel block. The wheelchamber is better glued on the paper template, in order to smoothly arrange the wheels.
• Wheels are pasted in a checker order.
• From the reverse side of the wheel block also glue wheels.
• Next, we glue from above the caterpillar, which is made of a cardboard strip.
• Similarly, collect the second wheelchamber.
• Next wheeled blocks stick to the housing.
• Stick to the casing tower.
• Ropes on the sides of the tank can be simulated using a thread.

Tank ready. If there is a desire, you can paint the model.