Shuriken - throwing weapon Japanese warriors ninja, which is used for a surprise attack on the enemy. Its name translates as "blade hidden in his hand." These shurikens made of steel. They come in very different forms. But people familiar with the weapon ninja anime and movies, usually imagine a shuriken in the shape of a star. This "flying star" can be made using a variety of materials.
1
Paper shuriken is considered a classic origami model. It can be a four or eight-pointed. For the manufacture of a four-square pattern take a sheet of paper folded in half and it is cut into two equal rectangle. Each of them folded in half again. We get two two-layer strip. One bent over the upper right and lower left corner at the second - the lower right and upper left. Then again corners bend towards each other. Paper received two letters «Z» in a mirror image. Angles one workpiece slips in the second grooves. Figure flipped to the other side and once again pushes the corners of the grooves. Four-point star is ready.
2
For the manufacture of eight-pointed shuriken it takes eight squares of paper of the same size. Square sheet is folded three times: in half and the two diagonals. Two upper corners are bent to the center. The sheet is folded in half as in the manufacture of airplane models. Holding the strip so that an acute angle is on the left top, right top corner inflect inward figure. The result was a parallelogram. Make seven of these blanks. Then, the acute angle a workpiece inserted into the "tail" of the other. Figure progressively closes into a ring. To get to the star, the modules are shifted to the center.
3
Syricen can be made from an unnecessary CD. For this, except for the disk, you will need a marker, ruler and scissors. On the disk, the felt-tip pen draws a future star. For this, two perpendicular lines are carried out, and then from each direct angle - bisector in half the radius. The obtained points are combined with smooth lines. You can use another drive for this. According to the outlined lines, scissors are neatly cut off excess. So that Syricen was not rainbow, it is painted with stained glass paint or dark nail polish. If desired, the cracker is pulled by a tape.
4
For the manufacture of surrounding metal, a thin sheet of steel will be needed. Aluminum and stainless steel are also suitable. It is better not to use tin - it is too light. On the sheet draw an asterisk of the desired form. The drill is inserted into the metal drill and on the contour they make holes at a short distance from each other. The gaps between the holes are cut with a hacksaw. The edges of the steel surrogue are treated with a file. If desired, its surface can be painted, polished, apply engraving on it.
5
Paper stars have low weight and absolutely safe. They willingly play kids with them. Slow corners from the disk, so you need to handle it carefully. With an unsuccessful throw, you can cause injury to anyone. If you get into solid targets, the handicap from the disk will quickly split. Therefore, it is not suitable for thumping art of throwing. Metal Syricen is a real cold weapon that can cause serious harm to man. Because of his wearing, and even more use, the owner may have problems with law enforcement agencies.
Homemade shurikens from different materials are used not only as toys and means of self-defense. They can be an interesting interior decoration. You only need to show a little imagination.
0
1285
