How to make noise insulation in the apartment

Most often suffer from poor noise insulation, residents of multi-family panel houses. The high level of noise in the apartment provides a bad docking panels, a small thickness of the floors between the floors. Repair, noisy guides, loud sound of a TV or music ... All foreign sounds can be left behind the door if you make good noise insulation in the apartment.

Noise insulation in the residential room depends on what kind of noise you want to eliminate. All noises are divided into two categories: vibration (those that occur under the influence of shocks and are distributed exclusively in a solid medium) and acoustic (which are transmitted in the form of oscillations by air). Impact noise can be good to "feel" at itself during the repairs from the neighbors. Acoustic noise is what you hear during a noisy parties from neighbors, music, laughter, loud conversations.

Soundproofing an apartment must be complex. That is, the walls, gender and ceiling are subject to special trim. In addition, to protect your dwelling from extraneous noise should do the doors and windows. It is best to take care of housing noise insulation even at the stage of its construction, however, since this option is not suitable for the apartment, it is possible to provide silence in the room with the help of special sound-absorbing materials.

If you are a resident of a panel apartment building, then the most likely the wall of your apartment does not differ much thick. Therefore, it is possible to increase their thickness with drywall. At the same time, the space between the wall and sheet of drywall must be filled with a special material that will absorb extra sounds. It can be foam rubber, mineral wool and more. By mounting the metal frame, the locations of profiles must be additionally insulated with rubber gaskets to avoid transmission of vibrations. It is worth noting that this way of sound insulation "steals" a lot of useful rooms at the expense of the walls.

An important element in the noise insulation of the apartment is the processing of ceiling with special materials. The principle is the same as during sound insulation of the walls. A metallic frame is created, then layer a layer of soundproofing substance - glass salas, foam rubber or special plates from basalt or mineral wool. They have a small thickness, while creating a good effect. And layer of plasterboard will complete the ceiling insulation.

Next, insulating the floor. There are special materials that are put under the laminate or tie. This is a compound from paper, fiberglass and a synthetic substance. It has a small thickness and at the same time perfectly absorbs vibrations and serves as a shock absorber of shocks. The waterproofing film is placed on top of the noise insulation layer.

Do not forget about noise insulation of such an inconspicuous, but important device, like a socket. Out of it, pull out and launch the hole with a layer of a dense soundproof material. After that, gently close the outlet with a gypsum mixture.

Central heating risers also need sound insulation. To do this, remove the concrete around the pipe to a depth of 8-10 centimeters. The purified tube is neatly isolate glass gamble and cement reinstall.

Sound-insulating double-glazed windows are used to isolation from noise from the street. Applying the technology of triple glazing, they will minimize the penetration of noise in the apartment.

The massive and thick door is another obstacle for noise. At the same time, the doorway must be insulated with rubber gaskets.

Remember that the best effect is achieved only with an integrated approach in solving the problem of unnecessary noise in the apartment. Use only high-quality materials, and if necessary, contact your specialists.