How to make a partition in the room with your own hands

How to make a partition in the room with your own hands

Every person dreams of his secluded corner, but not always the apartment is divided into rooms that can be issued as an office, living room or bedroom. How to achieve the desired comfort and convenience, if you have only one-room apartment at your disposal?



1
Partition in the room

Perform the separation of the room to the zone is not very difficult. In this process, it is necessary to complete the correct calculation. Thus, in high-rise buildings it is not allowed to install heavy capital partitions without prior approval, since each inter-fitted overlap has a weight limit. If you exceed the permissible load, the construction of the construction will appear cracks fraught with subsequent destruction. Therefore, if you want to use heavy material to build, you will have to first get a special permission.

If we consider private single-storey houses, then there are no restrictions. You can build a septum from any material. Please note that you must build a correct design, suitable for your design. So, if the house is a boardwalk, it is unlikely to power the brick partition installed on its surface. In this case, they will have to equip their own foundation for the partition.



2
How to make a partition in the drywall room

This is the easiest option of the septum.

  • According to the prepared plan, taking into account the construction weight, the markup of the place where the partition will be installed.
  • Production of guide profiles attached to the wall.
  • Marking and installation of racks for the future doorway. Door jumper.
  • Installing racks around the perimeter of the partition.
  • Fastening already marked and carved plasterboard sheets.

Partitions from drywall are performed very simply, but this is not the best solution. The soundproofing characteristics of drywall are far from perfect.

3
How to make a wooden interior partition in the room

Wood partitions are good only in environmental terms. The tree is low fire and moisture resistance, as well as insufficient noise insulation. They are beautiful and due to low weight, easily installed.

  • It is necessary to shoot down the frame from the boards, selected according to the size of the opening. Boards must be 1 cm shorter.
  • According to the prepared markup, adjust to the semi 2 bars with a groove, the value of which corresponds to the thickness of the frame board. The ceiling is fastened with a triangular cross section.
  • The frame must be inserted into the groove between the lower bars. Lock it and attach it to the top brus.
  • Frame can be seen with clapboard, plywood, boards. During the upholstery, a place for the door opening is formed, a door frame and doors are installed.

4
How to make a partition in the room from foam/ Fuel tunnels

Such partition differs not only excellent sound and noise insulation, but also good thermal insulation of the room.

  • Clean the floor from linoleum, laminate and remove the leaks of glue. Carefully degrease the base.
  • Prepare cement mortar and blocks that will be laid.
  • Post the place of the future installation. To do this, install 2 wall blocks to the walls of the profiles, pull the cord. On the line of the cord, put the first row.
  • Approaching the future doorway, continue the laying process, but in the opposite direction.
  • To install door jumpers, perform the necessary grooves in the end parts of the blocks.
  • Similarly, mounting jumpers from the opposite side. The remaining blank place can be laid with bricks.
  • Install the door frame in the outlooked opening. Take the interroom door.

The selection of the partition depends only the size of the shared room, and from what you want to get as a result of the installation. You can share the room, both fully and on individual zones, but for this it is necessary to take into account some nuances. Pay attention to the weight of the future building, financial costs, as well as the abandoning ability of overlapping, interior design, and finally the ability of sound absorption. After analyzing all sorts of "for" and "against", you can proceed to the choice and installation of the desired option.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close