From all castles there are keys, but sometimes it happens that there are not enough keys and need to do a duplicate so that everyone can get to the cherished door. Also, they are traded by the creation of duplicates of keys and fraudsters, but we hope that our article will study decent people who will use information in good kinds, and not harm to someone. Let's consider with you in detail in detail the question of creating a keys duplicate with your own hands and deal in all sorts of ways.
Sleep key
The first way that we will look at this creation of a duplicate key by using the cast, so that for a start we will need to figure out how to make the surface of the very key.
Most often, such a simple material like plasticine is used for the manufacture of the cast (probably, everyone saw such a way of manufacture in movies, when attackers tried to make a duplicate key from the safe, for example). Finding the plasticine will not work, especially if schoolchildren or little children live in the house.
Among other things, we also use the oil of plant origin and a metal plate (desirable dimensions of 12 cm in length and half astimeter thickness). When all the necessary materials were at your hand, you can start making the cast. The sequence of actions will be like this:
- On a metal plate, it will be necessary to roll a piece of plasticine as thinner and carefully (this case, the layer of plasticine will be better), the color of this material does not matter. It must be remembered that the plasticine layer should not be less than the thickness of the original key, otherwise it will not work. In this case, the layer will not work more than 1.6 cm.
- In order for the key beard not sticking, the layer of plasticine must be lubricated with ordinary oil of plant origin.
- Now it's time to "print" the key on the plasticine. To do this, take the original key and simply press it into plasticine, first one side, and then next to the other.
Sometimes it happens that the original key is lost. In this case, you do not need to immediately run behind the new castle and crack the door, especially since it is not always real. It is necessary to take the workpiece and make the following movements:
- I'm satisfied until it stops, the head at the same time is obligatory to housing the passages.
- Carefully, but with pressure, we are trying to turn the workpiece in the lock to Maxim, and, to the right, allegedly opening the lock.
- Now you need to move the workpiece in the castle first upwards, and then down, while, too sharp movements do not do, so as not to break anything nor the workpiece, nor the castle.
- We take out our workpiece very carefully from the larva, and when this mission will be performed. You will get the finished key blind.
- The only thing that remains is to simply cut the excess metal from the workpiece, because the contours of the desired key will be clearly visible on our billet.
Key duplicate methods
Let's now look at simple ways to create duplicate keys. The easiest way:
- For the first method, we need a lighter, the simplest wide scotch and cover from the canning can. First of all, we heat the key with the help of a lighter, and we do it until the wicket is formed from the soot.
- The next step - we are waiting for the key to cool down, and immediately after that we make it imprint on the sticky side of the Scotch (for this you will need to take a piece of scotch a little more than the key size so that the whole key is imprinted on its surface, and not some of his parts).
- Now you are a transparent scotch, which is clearly visible by the key imprint with all its small details and bends.
- We need to dissolve the cans. To make it a fairly smooth surface, from which you can easily cut our duplicate, you can use various healthy tools for this, you can easily understand.
- When we got a smooth surface, we apply our tape with the print and cut the key. Now you have a ready-made duplicate key.
Key manufacture
If you are already ready to cast the key, and you want to make a really high-quality duplicate, you, of course, will need some skills to work with such a tool as a feet. In the event that the imprint is already on the immediate surface of the blanks, then you will have to very carefully cut extra parts, and at the same time, constantly, check the quality of your work. It turns out that you are cutting the extra part, and each time we try, how good the key goes to the castle, and can they open it.
In the event that you managed to make the cast on the plasticine, you should not think that most of the case is done, you really need to do enough global work. So that in your hands you have a high-quality duplicate, and begin with drawing the right and accurate drawing.
After the drawing is transferred to a blank, it will be necessary to apply your skills to use the above-mentioned supfil. It is using this tool that will need to cut an accurate copy of the key from the blanks. All bends, grooves and various kinds of deepening are very accurately and neatly carved here.
It turns out that without special equipment it is very difficult to make a high-quality duplicate key that could be used constantly.
0
273
