Sometimes there is a need to independently disassemble smartphoneFor example, it is not possible to carry it into the service center. Then in front of a person, even if he is strong in electronics, the question arises, how to disassemble the complex communication device to not damage it. Of course, this is quite possible, you only need to enjoy relevant knowledge and special tools. It is also worth considering that after such a disassembly will be lost guarantee. But if you intend to risk, then following the recommendations provided below, will undoubtedly achieve the desired result.
Before starting to disassemble iPhone. 5 It is necessary to take care of the presence of tools, namely stocking vacuum suction cup intended for disconnecting the screen, cross-hard screwdriver, plastic blade. Having all these tools proceed to the subsequent disassembly of the device. Turn off the iPhone, unscrew the back cover, then remove the screen directly.
How to disassemble iPhone 5 - screen disconnection
We unscrew the special cruciform screwdriver on the bottom panel two small screws that are located on the sides of the Lightning Connector.
Then, using a vacuum suction cup, disconnect the screen carefully. If there is no vacuum suction cup, then you can use any other tool for this, with which you contribute to the bottom and raise, but it should be extremely careful. Since you can not only damage the screen itself, but also scratch the case.
Next, the screen is lifted and unscrew from the motherboard. It is worth noting that all the internal components of the fifth iPhone are quite reliably screwed.
On the motherboard, we unscrew screws, with the help of a plastic blade, we later use the shield connector and remove it completely.
How to disassemble iPhone 5 - disconnecting the battery
Next, you need to disconnect the battery. Even smartphone is off, examining its internal components when the connected battery, you may get a shock.
So that you are not electric shock or damaged hardware necessary to remove the battery. Make it possible with plastic spatula. Do not be upset if immediately disconnect the detail you could not. Perhaps she is stuck. Plastic spatula carefully remove the battery from the glue, it is not strong holds, so all the work.
How to disassemble the iPhone 5 - the removal of the motherboard
- If the battery has been removed, it is necessary to unscrew the screws holding the camera. Still it is necessary to disconnect the cables speaker, and microphone and headphone jacks. After unscrewing screws, retaining slot SIM-card and directly stub antenna.
- If you have disconnected all the cables, you can remove the motherboard. Frame smartphone we defer and work exclusively with the motherboard. Unscrewing two screws disconnect chamber.
- Turn off after three shurupchika holding vibration motor. Unscrew the seven screws, namely, one is in the right side of the trail, two near the bottom of the headphone jack and four holding everything else.
- Lightning-disconnect connector which is retained by means of special fixtures. Then disconnect himself CPU. To do this, you need to remove the protective film.
As disassemble iPhone 5 - detaching pieces from the front panel
On the front panel, unscrew the button with the symbol of the Home, which is mounted on a bracket. In conclusion detach the metal plate protects the screen from contact with other parts. Now that you have successfully removed the latest component iPhone. 5, its disassembly can confidently be considered finished.
Of course, it is difficult to implement self-disassembly smartphone without damaging it, but it is quite possible. We just need to strictly adhere to all the recommendations, and to be extremely cautious and careful. After enough delicate device, so you need to handle it carefully.
0
3039
