The farm always finds lumber: wooden boards, slats and bars. Usually all this wealth is bought in a construction store or specialized market. But if you have a log, then you can significantly save on lumber, sawing it yourself. The logs can be cut across, along or even form. The last method is used very rarely - only for complex wooden structures. Since it is very difficult to independently execute at home, then consider the other two.
1
Cross cutting logs - a completely simple way of sawing. For him, they need a special feature, in the people - "goats", and saw (manual, electric or gasoline). The log is horizontally stained on the bed and saw in the place where it is required.
2
If there are no goats, then you can cut the log in cross, Opels one of its edge to another log.
3
For longitudinal sawing logs, a special sawmaker will be required, which can be bought in a construction store. In such a log of logs, you can cut on any thickness of the board or bars.
4
The finished pailorama is expensive, so it can be made independently. The figure below presents a detailed drawing of the self-made panel.
5
If you do not plan to often cut the logs on the boards, then it is not necessary to acquire or make a stationary sawmill. You can make it a simple imitation, securing on the log guide from the boards, along which the usual electric saw will move on the side.
6
And you can recommend this method. There are two rigid supports on the edges, the guide is fixed on top, and the carriage with a saw is installed on it. In this case, the log in this case will be under the guide - in contrast to the previous method, where the log in the side.
We told you about the easiest ways of sawing logs. Do not forget that when working with any tool, especially with a saw, you need to follow safety.
0
3413
