A new sparkling car in the car dealership captures the spirit. But in fact, it is possible to give it this species at home. Only 2-3 hours of fascinating work - and you can safely be proud of yourself and your car.
1
Before you begin to polish the car, you need to prepare it. The car should be penetrating well, clean from dirt and dust. Then wiper dry. If there are stains that are not laundered, you can use the "White Spirit" to remove them. For high-quality polishing, the maximum cleanliness of the body will be required.
2
It will take a polishing machine and a pair of circles for polishing: more larger and bed. If there are no cars, you can use the drill. However, it is very strong vibration from it, which negatively affects the well-being of the hands. Also, you should also purchase a special polishing paste. It is desirable that it was three species: with a large abrasive, with a small and disbanded paste.
3
In the process of polishing the car is divided into several zones and work with each in turn. Start work with the use of paste with a rough abrasive. A small amount is applied to a circle for rough polishing to prevent premature drying. Approximately 1 tsp. On the square 40 * 40 cm. Next, not including the machine, the paste is smeared, then polished, starting with a low speed of the machine, go to the higher. It is necessary to polish first horizontally, then vertically. Repeat this procedure several times.
4
After polishing the entire body, coarse paste is wiped with a polishing sponge, removing the remnants of the paste. Next, the same work is performed using pasta with small abrasive. It is applied similarly to the previous one. The polishing circle remains the same.
5
After the second stage, polishing should also wipe the body with a polishing sponge and remove the remains of the paste. The sponge must be rinsed in warm water after processing the three zones of the car. Next, a dry-soft cloth is applied to the dry soft cloth and covers it separate parts of the car. When the paste begins to be white, take a circle for soft polishing and work with a polishing machine.
6
The final stage is to apply a paste that protects polishing. The finishing layer of paste should be updated at least once every two months. Then you can maintain the shine of the car without significant labor costs.
Car polishing - the process is long and requiring the attachment of strength and energy. But the washing and home polishing can be many times better than in the service where such pleasure is not cheap.
0
1261
