A beautiful and well-kept car causes interest in passersby and pleases its owner. It is necessary to pay attention not only to the "insides" of the car, but also its exterior. The polishing of the surface gives shine and enhances the color, removes minor scratches and scratches. You can cope with this process with your own hands and do not overpay for services in the car service.
1
For high-quality polishing, it is required to prepare the surface of the car - wash the body with water from dirt and dust. After drying - wipe with a dry soft cloth. For polishing, a special tool is used - a polishing machine, but you can do and drill. Pooforone circles for coarse and fine polishing are chosen as nozzle.
2
Polishing pastes are produced in kilogram tubes and are calculated 3 times. The process will require 3 types of paste: a rough-abrasive, finely abrasive and disapprosive. Try to choose a professional class polyrolol.
3
The polishing process is to apply the polyrol on the nozzle and the uniform distribution over the entire surface of the car. At the beginning, they use a circle of coarse polishing, which most often has orange color. 10-20 grams of pastes with rude abrasive particles are applied with a thin layer and smeared along a small part of the body. Having done this work, the machine on low revs and cross-shaped movements is distributed polyrolol. First, the movements are carried out horizontally and only then vertically. The speed of the machine increases gradually.
4
Thus, the first layer of polishing paste is applied to the entire surface of the car. Remember that the process-consuming process and does not require a rush. Polishing always starts with the roof of the machine. Excess paste is removed by a cotton cloth immediately after the passage of each site. It is necessary to follow the cleanliness of the sponge and wash it in warm water.
5
Using the already appearing skills, finely irrevocable and abrasive pastes are applied similarly, while a thin polishing circle is applied having a gray color. The process of applying a protective polyter with the entire body is completed.
After polishing your car will shine like a new one. Polyrol, which is covered with a surface, protects the machine from harmful effects of the environment. In order for your works do not disappear, update the protective layer every month.