The admission group is a way to determine the qualification level, which has electrical personnel. Such an assessment determines the knowledge of basic secure methods of working with electrical installations. The assignment of the admission group is possible only in the presence of a special commission, while the certificate of a single sample is issued attentive. The tolerance group can be obtained at the place of work or in the Rostechnadzor department. By admission group, the employer can identify many tasks that can be entrusted with this specialist. There are five admission groups.
1
The first group is assigned to people who do not serve electrical installations, and also do not work with existing electromasters. Such experts often have nothing to do with the electrician, but should know the rules for safe electric shock treatment, as well as be able to provide first aid when defeating the current. To obtain the first group of admission, there is enough briefing conducted by a person with a group of admission not lower than the third. After that, according to the results of the control questions, it is decided to assign a group of admission.
2
The second tolerance group is necessary to specialists who work with existing electrical machinery. This category includes welders, lifters, monterters. Such employees should have the knowledge of the first tolerance group, as well as to have a general idea of \u200b\u200bthe operation of electrical installations. At the same time, the certification is carried out for individuals who do not have electrical education. They are obliged to undergo training courses at least 72 hours. If the employee already has a course certificate, the second group is automatically assigned. This tolerance group is the highest, which may receive faces under the age of 18.
3
The third tolerance group gives the right to work alone with electrical installations with a current power to 1000 volts, allow brigade to install with a current power to 1000 volts. Marking "before and over 1000 V" allows this group to work in a brigade at installations where the current is exceeding 1000 volts. At the same time, the specialist undertakes to know the device of electrical installations and electrical engineering as a whole, be able to train basic safety knowledge and first aid to provide other people, as well as be able to oversee their work and provide first aid. Certification is carried out only by the Commission at the enterprise or in the Department of Rostechnadzor. At the same time, a person with higher electrical education can receive this admission group after a month of work on the second group, and the rest after six months of work.
4
The fourth admission group gives the right to work and maintain installations with current over 1000 volts. At the same time, the specialist should fully know the entire program of PTU or college on electrical engineering, be able to use the security tools when working with current, the rules of safe operation of installations, PUE (rules of electrical installation devices), fire safety, be able to read the electric hammers, thoroughly know the installation device with which it works, as well as train specialists of the lower groups. Certification is carried out only by the Commission at the enterprise or in the Department of Rostechnadzor. An employee with higher electrical education can receive this admission group after two months of work on the third group, and the rest after six months of work. Persons who do not have at least medium electrical education, can not receive this group.
5
The fifth group of admission makes it possible to carry out any work with electrical installations, as well as to perform the duties of the responsible for electroactivity. To obtain this group, the specialist must have thorough knowledge in the field of electrical engineering, to fully know the installation device, the rules for the safe operation of installations, PUE (rules of electrical installation devices), Fire safety and be able to clearly teach the basic knowledge on safety and first aid other people to watch the staff in the course of work. Certification is carried out only at the Commission premises or in the department of Rostekhnadzor, the person with the higher electrical form can obtain this access group after three months of work on the fourth group, and the others after 24 months of work. Persons who do not have secondary electrical engineering education, this group can not receive.
State inspectors, specialists in labor protection, electrical control, do not relate to electrical engineering personnel, but they must have group №4 with the right of inspection and the overall production experience of at least 3 years. Inspector on energy supervision and specialists in occupational safety power supply companies may have allowed the fifth group. Get access group can be, and in informal enterprises, just bought it. Note, however, that depends on personal safety and the safety of employees, so it is necessary to treat this matter very seriously.
Share advice:"How to access a group of electrical"
I do not know how to name an article not to swear .... Article: "How to access a group of electrical safety." But about "how to get" does not say a word at all. And it's good advice?
0
1649
Correct to write a voltage of 1000 V, rather than the current strength above 1000 V.
I do not know how to name an article not to swear .... Article: "How to access a group of electrical safety." But about "how to get" does not say a word at all. And it's good advice?