How to turn off the touchpad in a laptop

Touch mouse - an indispensable detail of a laptop in remote trips, in transport and simply in any situation. However, there are times when in the process of active work using a conventional mouse, touchpad at the slightest touch creates confusion, reducing performance and productivity. Disabling the touch panel is temporary or constant, depending on the method of deactivation.

Studying all possible ways to disable the built-in touch pad, it turned out that there are pretty bizarre methods that, oddly enough, on the go. So, the first option. Take a bank card and close it a problem zone. For confidence, it is possible to fix the edges with a piece of adhesive tape. Simple and angry, however, do not be surprised by the inappropriate views of those surrounding, which will be lucky to see such intelligence.

The second option is "simple." Before you start typing the text, follow these points: Cover the mouse in the required location by locking the cursor, and then move the arrow to the lower right corner. With this scenario, the disorderly rampant cursor at the time of the active set of text decreases to a minimum.

The third option is "logical." On all laptops, including netbooks, there is a "Fn" function key, combining with a special button you turn off the touchpad. Carefully inspect the top panel of the "F" keys, one of them has a drawing, symbolizing the crushed touchpad. Press the combination, "fn" + Touchpad Disable button, and you deactivate one movement or activate the auxiliary panel.

Option fourth - "logical." Most laptops provide a separate button off the touch pad. It can be both in the form of a point in the corner of the sensor and be located nearby. With one click you deactivate the unbridled cursor.

The option is the fifth - "tricky". If you do not want to constantly play with the disconnection of the touchpad, we offer an alternative. The active sensor will automatically turn off, as soon as you connect the usual mouse, and just just come into effect with disconnecting the mouse. To do this, you need to make changes to the settings. In the "Start" menu, select "Control Panel", then open the "Mouse" and the "Device Settings" tab, after the "Turning on / Disable Touch Panel" item Make the "Disable" mark.

Option six - "program". Today, a whole range of programs that reduce the activity of the sensor or limiting the workability of the cursor at the time of typing. Depending on the manufacturer of the touch pad, you need to search for the appropriate program. Also, using the program, you can establish a number of functions that will switch the sensitivity of the cursor, depending on the chaotic movement, for example, the sensor will not respond to the touch of the palm.

Option six - "radical". You can drastically change the settings and completely abandon the functionality of the sensor if you go to the BIOS and select the corresponding value in the "Internal Pointing Device" section.

Option eighth - "Mechanical". This option is appropriate only if you thoroughly decided to get rid of the multisensor and consider that it is solid problems. To do this, you need to open the front panel cover of the laptop and disconnect the loop from the sensor.

Of all the above presented ways to disconnect the touchpad, it is recommended to use the most innocuous, those that will not cause damage to the software and integrity of the computer.