How to cut walnut

If walnut grows on your site, then you are simply obliged to know that it is obligatory to cut regularly, in order for the crown to be formed correctly, and the harvest was large and rich. For someone, it seems that this process is not important, but such an opinion is erroneous, and if you want to be really a good gardening, then without trimming in this case it's just not to do.

1

Cut walnut

After the gardener gather their harvest, he must think about the formation of the crown of the tree under consideration. This procedure will be relevant only if it is necessary to trim, it does not apply to very young trees. Do not do without trimming if the tree will develop intensively and start right and left its branches, binding them among themselves.

Most often, intensively nuts develop 5 years, and the gardener is required to ensure that the length of each of its branches does not exceed two meters, because. Otherwise, Krone will be completely covered with a magnificent greens, but the kidneys of a vegetative nature will eventually get very weak.

If you spend the trim process for the first time, remember that it is necessary to trim the branches very briefly so that their length does not exceed 30 cm after trimming thick and large fruit.

In order to correctly form a crown of wood, you need to remember that after five years, one of all powerful and strong branches will need to choose one single that will become the main branch of the walnut crown. If you drop everything on samonek and decide that the tree should develop on your own, you will very soon notice that from young kidneys there are several more pains, which, on the contrary, it is necessary to avoid. You can avoid the crown in different ways, there are several ways for this. that we are more details now and consider.

2

Methods of trimming and formation of a walnut crown

The first rule that concerns each of the existing ways is - the correct crown is obliged to begin approximately at one and a half meter height from the soil. And for beginnings, consider the Yarus scheme Trimming Tree:

• If you chose this method of trimming a walnut, then you need to remember that in this case it will need to leave three strong branches on each of the existing tiers (which will be the "skeleton" of the tree).
• The distance from each other should be at least 20 cm in order for the crown to be as small as possible shadow (sun rays should penetrate everywhere).
• It is also done so that the krona will be symmetrical, round in shape and was not one way.

• After this kind of trimming is carried out, you need to move to the conduct of stamping trimming, which is to remove the entire lower tier.
• It is done in such a way that not a single branch grew up at one and a half meters from the ground.
• Crohn should consist of five, the maximum of six tiers, but the distance between them should not be less than 55 cm, and in this case the top is better to cut in order for the nut to grow into a width and of course fertile.

As for the leader scheme of trimming, everything happens here a little differently, namely:

• The main task of such trimming is correctly and evenly distribute skeletal branches.
• It is necessary to do this in a spiral, and the distance between the branches should be at least half a meter (the distance is not in width, but height).
• In this case, you do not need to touch the first three tiers until fruiting starts. After this period passes, the second order branches on the first three tiers will have to gradually cut, in order for all parts of the walnut sunlight.

Czech-shaped trim is as follows:

• If you want to collect fruits without unnecessary problems, it is necessary to trim the nut with a czech method.
• If everything is done correctly, you will achieve the fact that the tree will cut into the height and will let the branches of the styre.
• Skeletal branches on each tier will not be more than four, and the height of the stamp will be about two meters.
• It is very important that a couple of branches that are upstairs are mandatory, it will be necessary to cross the branches that are located on the top tier.
• After this process, each autumn will need to repeat such trimming over four years.

The rejuvenating trim is as follows:

• This kind of trimming should be carried out on trees whose age exceeds 8 years.
• In this case, it is necessary to remove all branches that have already been dried, but also do not need to forget about skeletal branches that are located on the bottom branch.
• Thanks to such a rejuvenating procedure, the tree will be good fruit. Such a procedure becomes necessary in the case when nuts have become small and few of them.
• Pruning of this type should be carried out in spring, and earlier. In order for the light well penetrating into the crown of wood, you need to cut branches that grow inward.

The main goal of trimming is to correctly form the crown so that it is the necessary form. Fruits after such trimming will be larger, and their number will become more, unambiguously.

As it was possible to understand the above information, trimming is a very important and necessary procedure for fruit trees, including walnut.