How to make a bow from paper

How to make a bow from paper

Registration of neat and interesting paper bows - useful skill, which will be especially in demand when designing postcards and gifts. How to make a paper bow?



1
Decoration of a flat paper bow

A simple neat practical flat bow will require minimum effort and practical skills, but the result will become concise and with the spectacular decoration of any gift.

Prepare for work:

  • colored paper sheet - material for making a bow;
  • paper for making a bow pattern;
  • scissors;
  • glue.

Cooking a bow:

  • Prepare templates for a bow. The sketch can be printed or transferred to paper yourself (the image below presents templates for two bows).

  • Using templates, cut out the details of the future bow.
  • Taking the largest detail, sweep its opposite ends to the center. Lock them with glue.
  • Using glue, attach the previously obtained part over smaller petals.

  • The core make up with a short strip - lubricate it with glue and ishing both layers of the bow.



2
Registration of a bulk paper bow

Prepare for work:

  • colored paper of one or several tones;
  • scissors;
  • glue;
  • ruler and pencil.

Cooking a bow:

  • Using a ruler and pencil, draw on colored paper the base templates. In this question, you are provided with complete freedom of choice - your bow can have folds both in color and different. The width of the bands is 1-1.5 cm. The length of the bands will be different. You should carve 6 long strips - 3 to 25 cm and 3 to 22 cm, 2 bands of 19 cm in length and 1 tape of 9 cm long.
  • From each paper tape form "eight". To do this, bend and straighten the strip in half - the resulting room will become a central mark. The right edge of the strip is summarized to the center on the right side, and the left - with the left. The ends of the ribbon are leaving to the center below. Remove the ends.

  • Such "eights" form from all bands, except the shortest. Her edges glue with each other, so that the result is a ring.
  • Collect a bow, sequentially laying out the layers of paper "eights". Each subsequent layer is fixed with a glue or bilateral tape.
  • In the center of the composition, install a paper ring.

3
High Paper Bantian

Prepare for work:

  • prepare several sheets of paper of different colors;
  • a small fragment of color cardboard is a middle of a bow;
  • pencil;
  • scissors;
  • glue;
  • beautiful large button.

If there is no beautiful buttons for decorating a bow on hand, it should be cut out from cardboard not 1, but two circles.

Cooking a bow:

  • Prepare billet strips. Cutting paper strips 1 cm wide. 8 pink cuts have a length of 25 cm, another 8 blue bands have a length of 22 cm and 8 strips of green paper should be a length of 19 cm.
  • From the cardboard, cut the center of a bowl with a diameter of 2.5-3 cm.
  • Using glue, attach a bow of a bounty to a central circle. The first round consists of the longest petals, the last (third) - from the shortest.

  • Complete the composition - fix in the center of decorative buttons.

4
Paper-harmonic paper design

Prepare for work:

  • 2 sheets of color or wrapping paper (A4 format);
  • glue;
  • scissors.

Cooking a bow:

  • Each of the sheets A4 is separately folding the accordion.
  • Next, bend the harmonic strips in half. Cut the edge of the semicircle. Side parts of the harmonicus lubricate the glue and connect. As a result, 2 semicircles should be obtained.

  • Now it is necessary to connect the semicircles received in a whole circle-bow. The side pieces are missing with glue and secure each other.
  • Cut a small circle and glue it into the center of the composition.
  • Run a piece of bow.

5
Narrow Paper Bantian

  • Prepare 5 lanes in length 25, 22, 19 and 9 (2 pcs.) See in the shortest ribbon connect the beginning and end. "Place of Meeting" fasten with glue. It turns out a small paper ring. Such a ring should be made only from one short cut.
  • The ends of the longer bands are leaving to the center, and after they lock with glue.
  • Next, collect a bow, having prepared billets one on top of another. Each subsequent row is attached with glue. In the center of the composition, install a paper ring.
  • Taking the remaining free cut, tie them the central ring.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close