Fungus, mold appears not only in launched apartments, raw basements. The main reason is incorrectly laid ventilation, insufficient heating power, increased humidity. The walls affected by fungus look ugly, but most importantly - he negatively affects the health of people. Disputes along with air fall into the lungs, causing asthma, allergies and intoxication of the body. Therefore, noticing on the wall even the slightest signs of infection with fungus, it should be immediately proceed to its liquidation.
You will need:
putty knife;
brush;
antiseptic solution;
sandpaper;
respirator or mask;
latex gloves;
means for removing fungus and mold.
1
When working, it is impossible to neglect the safety technique, so use special protection tools. So that there is no contact with the disputes of the fungus, harmful substances of the antiseptic, wear a protective mask, gloves and work in a well ventilated room. Furniture, indoor plants better endure another room.
2
From the walls are moving all the wallpapers. Spatula scrape all the affected stucco. It is loose, so it is easily removed. Carefully consider the raid with a metal brush or sandpaper. To dispute the fungus do not spread throughout the room, the wall is wiped with a damp cloth.
3
After drying the surface, all walls are treated with a fungicidal solution. Olymp Stop - means for removing mold, fungus indoors with high humidity. Biotol - Spray, applied in bathrooms, kitchens, except the fungus removes plaque algae, moss, lichen. Alpa Fongifluid allows you to handle plasterboard plates, tiles, stone, concrete wall, does not contain chlorine and odorless. Dali has the same characteristics, but it is cheaper.
4
We repeat the processing by these funds several times. There should be at least 5 hours between application. After the end of the processing of walls, the surface of the antiseptic surface is ground. Then plastering the walls and after their complete drying with glue wallpaper.
5
If the fungus covered the seams between the tiles in the bathroom, then we clean all the gaps with a special scraper. As far as possible, we are processing a mushroom tool and wiping, which includes antiseptics.
6
Removal The fungus will be effective if, along with cosmetic methods, take measures to eliminate the causes of their occurrence. In the absence of thrust in Ventkanals, poor insulation in the intervals between the panels and other shortcomings of the construction of the house, contact your housing and communal office. If the cause of mold in the increased tightness of plastic windows, install the ventilation valve or constantly ventilate the room.
The fungus, a superficially struck the wall, can be removed by moving the wall, ceilings, slopes with warm water with the addition of chlorine. It is important to remove the fungus at the very beginning of its development, as then he penetrates deep into the wall, and it will take it much harder.
Share advice:"How to bring the fungus in the house"
0
1347
