How to make a backpack for dolls

The dolls also go to school and, as a diligent disciples, they need portfolios that little craftswomen are able to do both independently and with moms. To make a school puppet backpack you need to pick up the appropriate material and sort out the simple instructions for creating a backpack.

1

Cardboard backpack

The cardboard backpack is very durable and can be made volumetric so that it approaches even the biggest doll. If it is decorated with a cloth, then it will acquire a type of real wreck. To make such a backpack you will need:

• Cardboard of different colors
• Tetradi leaflets
• Pencil with ruler
• PVA glue
• Scissors with superclay
• Lace
• Lipucca

Process of creation:

1. Before creating a backpack paint its pattern on a notebook sheet. In his center, the rectangle is drawn with sides of 4.5 and 3.5 cm. This is a future backpack back, below 1.5 cm draw another same rectangle.
2. From its lower edge, we deposit 4 cm and draw an arc. In order to draw it in the center of 0.5 cm and mark the extreme point of the arc. Then from the extreme points of the rectangle, curved lines are carried out. The front of the bag is ready.
3. Above the upper rectangle for 4 cm makes marks. From below the centimeter, the center of the rectangle is celebrated. Connect the dots of the arcuate line. Then below one and a half centimeters from the lower wall of the backpack draw two rectangles. These are sidewalls backpack.
4. The tops of rectangles are also spinning with an arc and mark gluings. Then the scheme is crossed into cardboard and all parts are cut. On ready-made items, they draw places for bending on the back and top of the portfolio. Also mark the place of attachment of straps. When cutting out the workpiece there they make slits.
5. After all the details were bent, taking a lace of 10 cm long and felt in the holes on the backpack. At their ends tie nodules. It remains all the details to glue.
6. Blit start from the bottom, and after and on the sides. The top is better to leave the unclosed so that in the backpack you can put something. Superclauses or ordinary glue are suitable for cardboard. On the lid with a velcro glue the decoration, designed to symbolize the lock of the backpack. Puppet wreck ready.

2

Denim Backpack

A toy backpack, stitched from denim, is very similar to this and definitely not inferior to him in functionality. In addition, it can be decorate not only with adhesive decorations, but also embroidery to his taste. To create such a backpack you will need:

• Cardboard
• Denim. It is sometimes replaced by a piece of dense tissue or skin.
• Scissors
• Pencil
• Threads with needles

Process of creation:

1. Before starting work, make a pattern of a backpack for a doll. In this capacity there are two pieces of cardboard, which with the help of scissors give the desired form, for example, a trapezium. Dimensions can be arbitrary and based on doll sizes.
2. After all measurements are transferred to cardboard, all the details are neatly cut out and transferred to the fabric. After each detail is circled, 5 millimeters on the seams and allowances will be added to the pattern.
3. It turns out three details. Two of them will form a backpack, one will serve as a rolling part that will play a role. These parts are cut and stitched along the inner contour from the wrong side. Then the backpack is turned and cooled the edges of the movable part. Before the end of the image, the backpack needs only straps.
4. For this cut two rectangles. Their size should be enough for the doll freely to wear and remove the backpack. To check whether the selected length of the straps is sewn only in the upper part, and the pins are fixed below. If the length is suitable, they are sewn and bottom.
5. After that, the moving part of the backpack is sewn a button or beads, and on the outer part there are an air loop from the thread. It remains to decorate the backpack with sequins or embroidery and puppet new clothes.

3

Backpack origami

In addition to the most obvious materials, a backpack for dolls can be created from the most unexpected things. For example, from paper for origami. To create such a backpack you need:

• Origami colored paper
• Glue
• Rule with scissors
• Pencils or markers

Process of creation:

1. The sheet is placed horizontally in front of them, die on the right centimeter and rejuvenate along the entire line, spent from one end of the sheet to another. After that, the sheet is folded in half, so that in the middle there is a bend. The curved strip glove on the other side.
2. At one half, the received rectangle marks the middle to lower the corners to it and clearly designate the fold line. The whole resulting triangle is also lowered down. The sheet is straightened again, the podium lines on it will be well highlighted.
3. The workpiece is disclosed, the upper part is flexing down, then pulls behind the middle. It is formed by rum, it is divided into 3 parts exactly from the center. Then the lower angle is raised to the intended line and glued. The top corner is lowered and also glued.
4. Then, on the planned line, the right and left side are flex. Lower them down and straighten. The resulting package is hiding inside the sides. From above, 4 cm flexion and a pencil draw a semicircle. All are hidden, and the semicircle itself lowers - the backpack cover is ready. It remains to stick the handles and pockets, decorate the backpack and it is ready for the sock.

Make a backpack for doll with your own hands is quite simple. It takes a little time and zeal to please the owner of the doll with a new game accessory.