Laptop Even with a large screen will not be able to transfer the entire scale of the image as flat TV with an impressive diagonal. Therefore, to view photos and video materials rationally connect the laptop to the TV. You can do this using HDMI connector.
Connection Algorithm: Step-by-step procedure
To accomplish it, you need to make sure that there is an HDMI on the TV - the connector. All modern models have the like. Typically is such a connector on the rear panel of the TV or side.
You will also need an HDMI - a cable that connects the laptop with a TV. Start the connection you need to turn off the devices.
Step One: Preparation of devices
You must turn off the laptop, and the TV. Then take the cord and insert one end into the connector on one device, and then on the other. Connectors must be identical. If they are different, then special adapters can be used. But at the same time it should be aware that the video quality or viewing photo may worsen.
Step Two: Download procedure
When the cable connects two devices, you should enable them. A mark will appear, which has been connected.
The TV must be translated into the "AVI" mode, then the signal will not go with the tuner, but from the laptop. This can be done using the control panel. In the settings you need to select the appropriate HDMI input.
Step Three: Setup
This is the most difficult stage. It is here that errors are allowed, and the connection happens incorrectly. Image adjustment should be as follows:
- Select in the context menu on the laptop screen by pressing the right mouse button, "Properties" - "Parameters" - "Advance". Click on the appeared option.
- The TV table will appear on the TV.
- The procedure should again occur on a laptop: Press the right mouse button on an empty place and select "Screen Resolution". Stop on suitable from the proposed options. If there are no such, then you should click on "find".
- Permission is worth choosing the maximum.
Step Four: Reboot Laptop
It is necessary to restart the computer technique to ensure that the settings take effect. No TV is not needed.
No sound reproduced: what to do?
There are cases when there is no sound after setup devices. In this case, the image "goes" correctly. What to do in such a situation? You need to specify a TV as the main device for playing sound. This follows:
- go to the laptop and press the right mouse button to "sound" (panel below);
- make sure the technique is connected to each other (the image of the speakers and the TV model will appear);
- click on the "TV" right-click - "use by default";
- confirm the action by clicking OK.
After that, you can start viewing the materials from the laptop on the TV.
Sometimes the connection of the laptop to the TV using HDMI is the only comfortable method of watching videos or photos. The connection procedure is completely simple: you should prepare a cable and perform a few simple actions.
0
528
