How to connect speakers

How to connect speakers

Almost all modern TVs, even a high price range, are produced with a weak audio system. They are designed for mutual use with the audio system of home theater. If you are tired of wheezing and rattling the speakers of the TV at high frequencies, as well as with loud use, then better put your own columns next to it. You can give preference to both computer columns with a subwoofer or without it and an acoustic system. Connection occurs approximately by the same principles. All methods will be disassembled in this article.



1
How to connect speakers to connect speakers - column cable

In this situation, it is necessary to rely on the column cable, since when the connector is inconsistent on the TV, you can easily find an adapter.

  • The most common cable that is used by computer speakers - TRS, which we all accustomed to call Jack or Mini Jack. The cable exactly the same connector occurs in most headphones. Sometimes columns have two such branched cables, sometimes one.
  • Modern speakers have an HDMI cable, which are equipped with new TVs. Older tulip type cable. There are exceptions that have a mini jack.
  • If you want to connect old speakers from any stereo system to TV, you will have to deal with either a tulip cable or with a mini jack. However, such columns may be worse than the built-in speakers.

Once you have learned the type of your cable, inspect the TV connectors.



2
How to connect speakers to connect columns - TV connectors

Here everything is extremely simple, since the TVs do not have a lot of audio inputs. You may have such connectors, depending on the novelty of the TV:

  • HDMI. An oblong horizontal connector is the best option for an acoustic system.
  • Mini Jack or TRS. He is in all TV, even quite old.
  • SCART connector. It gives a rather bad signal, it is worth considering.
  • Tulip is available only on old TVs.

If you have found a discrepancy between the existing connectors and the cable of the speakers, then buy an adapter.

3
Connect the columns to the TV

If these are computer columns, then you will simply stick the wire into the connector. If there are two cables, then comply with the correspondence - "Audio 1" and "Audio 2" may have different colors. Connect the cable of one color to the connector exactly the same color.

If it comes to an acoustic system, it is connected either directly to HDMI, or first to the amplifier, and then to HDMI.

In general, the process is quite simple. Remember that on the TV you need to make the maximum volume and adjust the sound with speakers, so you will observe all the conditions of resistance and get the maximum sound quality.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close