The keyboard is perhaps the most contaminated part of the computer. Many users prefer to dinner or drink coffee, working for PC, and nobody canceled ordinary dust. Foreign deposits accumulate outside and inside the device, buttons begin to shindle, or even not prescript. So it is time for cleaning procedures.
1
With partial contamination of the keyboard or scheduled cleaning, you can use:
napkins with alcohol impregnation (clean the keys and space between them);
cyber \u200b\u200bClean, which resembles a plasticine or toy "Lizun" (gathered fat and other dirt);
a vacuum cleaner for the keyboard with a USB connector (cleanse from crumbs and dust);
called with compressed air (blows fine particles from under the keys on their surface).
2
When there is a need for thorough cleaning, you need to disassemble the input device. To start, turn off the power and take a picture of the entire panel so that when assembling each button is in its place. Next, take a flat screwdriver or a similar object and lift one key. It will come out of the groove and easily get. Particularly careful be with a space, enterom and creiph. These keys are fixed on additional aluminum clamps due to its size. When cleaning metal elements also remove.
3
Place the disassembled keys in the soap solution for half an hour or fold into the bag and comprehend in the typewriter. After that, place the buttons on the towel and leave them dry. For sure to remove all moisture, use the hairdryer. In the case when the white keys during operation were sent, and the washing did not help them, it can be cleaned with an erasing elastic band.
4
Wipe the keyboard base with a slightly damp lint. Solids of garbage remove with a cotton chopstick or toothbrush. Make sure all the insides are completely dried. Set the keys to place and check their work.
5
If the keyboard got a liquid, immediately disconnect it and turn it over so that as much moisture can be removed from the device. In the inverted state, leave the keyboard for 24 hours, during this time it should dry. If inside the sweet, viscous liquid, which can glue the contacts and buttons, will have to fully disassemble the device.
6
The laptop keyboard differs from the usual, so it should be disassembled only in extreme cases. It is better not to remove the "ENTER" and "SPASE" buttons, since they are easy enough to damage. If the dirt fell into the gap between the keyboard and the laptop housing, move the needle snaps in the corners that keep the water panel. Then disconnect the loop and wipe the back of the keyboard and the space under it.
When cleaning a computer keyboard, expect caution. It is impossible to moisturize or rub the internal fee strongly so as not to spoil the contacts. You can not pull the keys from the nests, they should be removed easily, and put back with a click. Act carefully, and everything will turn out!
Thank you very much! I have never thought about something before, it is possible to disassemble the keyboard. So, I wrapped only, I pulled out garbage from her as it turned out that I could have sissed from under the buttons. And then I came across this article, I did everything according to your instruction, and everything turned out !!! Now I have a clean keyboard, like new almost. Works great. I'm very happy!
0
4927
Thank you very much! I have never thought about something before, it is possible to disassemble the keyboard. So, I wrapped only, I pulled out garbage from her as it turned out that I could have sissed from under the buttons.
And then I came across this article, I did everything according to your instruction, and everything turned out !!!
Now I have a clean keyboard, like new almost. Works great. I'm very happy!
We were glad to help 🙂