Weaving from the tubes was popular at the end of the last century. From the cast material, which is found in each house, you can weigh a beautiful vase, a box or a box. The technique of weaving from the tubes is simple, even a schoolboy will cope with the class.
Weaving from the tubes - a new passion or long forgotten old. Even in Soviet times it was very popular to weave the caskets, various souvenirs and even lampshades. To master this kind of needlework, you will need some materials, desire and prerequisite.
How to weave from the tubes - preparation of materials
So, in order to learn to weave from the tubes, you will need:
- ordinary newspapers;
- thin wooden spanks (for frying kebabs) or knitting needles;
- pVA glue;
- scissors (or construction knife);
- ruler and pencil.
As you can see, minimum materials, newspapers will be found in every home, so you can start. But in order to learn to weave something simple, you must first prepare the working material. Therefore, the first task is learning to twist the tube from newspaper paper.
How it's done:
- Put the newspaper on the table, let's notice the pencil on the paper canvase. The width of each strip must be from 7 to 9 cm.
- Strips cut, now the most interesting. We take a skeleton, put on the corner of the paper blank so that the corner of the tube is 45-60 degrees.
- Hour a paper blank on the tube. Only at the very beginning so that the tube keeps, you need to drop a little plow glue on the most tip.
- All, you can turn to the end and the second tip also to fix glue.
- We will not need a spat, so it needs to be carefully removed.
How to weave from the tubes
Let's get together a small vase, weaving technique is simple.
To work, you need to cook:
- newspaper tubes;
- bottle or jar;
- dense cardboard;
- scissors;
- glue, brush and acrylic paints.
How to weave:
- The width of the newspaper strip for this tube should be 10 cm. Twisted the tubes, the edges are fixed with glue, lay the blanks to the side.
- Now you need to take a bottle, jar or plate of the desired diameter, put on a sheet of cardboard, circle and cut a circle. You need to make 2 circles.
- Each long blank should be cut into 2 parts (if you made tubes from a regular newspaper, A3 format).
- On the reverse side of the cardboard blank you need to wash on the edge of the glue and start gluing the tubes in a circle in a step of approximately 1 cm.
- Now we welt glue from the wrong side the second cardboard circle along the edge, glue from above on newspaper tubes. Pretty pressed, put something heavy on top, leave for 10-15 minutes.
- We take a new workpiece, we glue the tip on the cardboard circle and begin to catch the "wave" newspaper tubes. Gradually, as we advance, you need to raise up the workpiece.
- Thus, you need to scream in a circle until a vase is obtained.
- Little trick: the tubes can be connected to each other without the help of glue, but insert one to another and continue weaving.
- When the main tubes are braided, it is necessary to leave a length of 5 cm long, glue from the wrong side with glue and wrap the workpiece inside. For the reliability of fixation, you can use conventional clothespins.
- Vase is almost ready, there are some more strokes: you need to paint the vase in the desired color on both sides: facial and internal. Let the paint get dry.
0
415
