In the disassembled state, to transport the boat from PVC is easy and simple. But the process of assembling-disassembly is quite troublesome and takes a lot of time, so the owners of such floats are often transported them in the assembled state. Of course, the transportation of an inflatable boat is not easy task, but performing.
1
In order for the "usual" trailer is suitable for the carriage of an inflatable boat, it is pre-prepared. The sharp edges of the folding sides, the "caps" of the screws and other attachments can seriously damage the cylinders and the bottom. In order to avoid this "ordinary" trailer will have to tuning. All that needs to be done is to purchase an inexpensive carpet or linoleum (by the way, the U-option will also be borne). These materials will become a kind of protection against possible damage. Carpet (or linoleum) is installed on the area of \u200b\u200bthe cargo platform. Special attention should be paid to sharp edges and edges. After the trim, the boat can be transported by protective material and in an inverted position (that is, the keel is up), and in the usual position (that is, the keel down).
2
To while driving on our bumpy roads, the boat fabric did not go away, the floodedness needs to be securely and correctly fixed using special tightened slings that can be purchased in building supermarkets, automotive or boat stores. For reliable fastening of the boat, the length of which is about four meters, it will take three lines. When the flooding is transported by a keel up, two slings fix across the boats, and the third is used as a longitudinal fastening. In this case, the motor is most often transported under the boat. It is firmly fixed with the help of four high-quality rims and pairs of slings.
3
When shipping boats, the keel is needed slightly smoothly - so the poles of the support will be the poles. Do not overload the floating grounds with heavy things (tanks and other major items need to fasten well). In this case, the carriage of the boat with a small weight (no more than 40 kg) is allowed, but only on a good road and for closer distances. The engine must be well fixed in such a way that during the ride he did not load the place of attachment of the boat itself to the transnt and had a decent interval to the roadway.
4
You can also transport the boat on a special trailer with lodges (they are also called Sladyms). True, such a trailer also needs to be prepared. Plavstation on such a trailer transported a keel down, while the onboard cylinders should rely on the lodents, and the trauma should not go beyond their edges. If the boat is transported with an installed engine, then it must be safely secured by a special retainer or any other fastening so as to prevent the "chat" of the motor with the transom. You can make an emphasis from the usual board, one edge of which will rest in the "foot" of the engine, and the second - in the trailer frame (followed by fixation).
5
Transporting a boat on a trailer with Sladyms, firmly fix it to the trailer frame. During transportation, constantly monitor the pressure in the cylinders, if necessary, pull them down so that the fasteners do not weaken. The flooding can be "covered" by a special transportation awning, so you will have the opportunity to transport a nonsense in the boat, but the overall cargo.
Now you know how to properly transport the inflatable boat so as not to damage it during transportation.
0
1915
