How to beat off?

Women's beret made from angora or soft wool. They will not be discouraged. Put on your head and slide a bit from one side on the edge. But it is quite another thing - takes for the military. Recommends often produce hats, similar to a frying pan or damn. You do not know how to beat off? Do not be discouraged, attach a little effort and listen to our advice. Your headdress will acquire a beautiful shape.

1

How to beat off takes off with water and sugar?

1. Prepare sugar. Put in a glass of warm water a tablespoon of sugar and mix up to complete dissolution. Sweet liquid will serve as a kind of hair lacquer, and will help the material to fix in the required position.
2. Put on the palm of any hand, as you are comfortable. My fingers, moistened in a sweet solution, energetically cut down the surface of the head remove, straightening it to the Cart. Put the necessary shape.
3. Periodically wet your fingers in the sugar solution during the beat of the beret. When drying, the fabric of the beret will remain in the form in which you were fixed. Optionally, insert a thick cardboard, plastic or a dense adhesive fabric after the chop to the headdress. Try not to fall under the rain, the shape of the beret will be lost.

2

How to beat off the hammer?

1. Water with water headdress. Use a pulverizer and evenly distribute water over the surface of the beret. Do not drag much, prepare the product to the excipation.
2. Turn on the iron. Pre-set the necessary ironing mode on it. Examine the iron takes two layers of gauze.
3. Place a headdress on a stool or other smooth surface. It is advisable to put a product on a cutting board so as not to spoil furniture. Touch the hammer carefully on the edge of the beret, so that it becomes sharp and thin, like arrows on trousers. Move around the circumference. You can replace the hammer with a table with a steel spoon. But with a spoon will leave more time to work. This method of chopping is suitable for a rough fabric product.

3

How to beat off takes the shaving foam?

1. Wear a headdress on the head or dust. Give take the necessary form. Do not remove it from my head.
2. Well in front of the mirror takes a shaving foam. Do not skip a single site. We will not be able to do it yourself - ask another person. Foam will help fabrics for a long time not to lose shape. Wait 5 minutes so that the material is well soaked with the means.
3. Water hands in cold water. Runify the shaving foam into the material of beret with a little effort. With the help of water, remove all divorces on the fabric. Finally adjust the shape of the product and leave the headdress until complete drying. This will require approximately two hours.

4

How to beat off takes - other ways

1. Drying on the head. Wear a wet headdress on the head. Press your hands the necessary form takes. Wait until the product dries on the head completely. The wet product on the head is the unpleasant procedure. You can use a mannequin, ball or a three-liter jar.
2. Newspapers. To the moistened headdress impose old newspapers. Apply the necessary shape with the help of hairpins, clothespins or other devices. Leave until complete drying and encircle. If there are flaws - apply the shape with your hands.
3. Starch. In Avudine, stir 130 g of cold water and 100 g of starch. Pour into a mixture of 900 g of hot water and stir until the powder is completely dissolved. Okuunate takes to the starch solution. See that the starch does not hit the visor. Carefully soak the cap in solution and take out. Do not press it out, put on the frame to the final drying.

Berets are made of material that is easy to handle. You need to know what form you need to give a head fault. Do not worry if the first time it did not work off the takes. Try again and you will definitely work out.