How to clean the seams between tiles

After some time after the repairs, the seams between the tiles acquire an untidy, dirty appearance. The appearance of mold and raids occurs due to the dampness, the effects of steam and water. Warm and wet environment - an ideal place for the development of fungi. And if you tighten the process of cleaning the seams, then it will be more difficult to cope with this to your attack. We will help you to master the methods of cleaning the seams using a girlfriend and simple means that can be done at home.

People's way to prepare a bleach to remove dirt from interputric seams at home:

In one and a half liters of water, you need to pour one hundred fifty grams of soda, one hundred grams of citric acid solution and one hundred grams of vinegar.
When you pour acid into a solution of soda, add slowly, otherwise it turns out a stormy reaction and the contents will splash.
All this is required to carefully shake up to move.
It is necessary to use such a solution carefully before starting to work with it, you need to open windows for venting.
It is recommended to work in rubber gloves, since the bleach is quite aggressive.
Toothbrush or painting brush apply a solution on the seams.
Give them to stand fifteen minutes so that all the dirt is dissolved, and then rinse with a damp cloth.

Also clean the seams between the tile will also be with the help of other solutions:

Mix vinegar and water in equal proportions. The solution is sprayed to the surface that is cleaned with a rigid brush. You can not use a metal tool! The dirt is washed off with water, then the tile is processed again by the same solution. It remains only to dry the working area.
Take 100 ml of hydrogen peroxide on 200 ml of water. When processing this method, rinse the surface with clean water is optional.

If the flight on the intercutric seams began only to appear, it is possible to remove it using household detergents - CIF, Fairy, Domestos, white or the like. Suts in mo in a solution, let it stand for about fifteen minutes, and then rinse with water and wipe dry. If the dirt is completely nothed from the first time, repeat the processing again.

If you missed the moment and determine anything can not do anything, you will turn out to be placed with the emery paper. This process is quite time consuming. The seams need to dry with a hairdryer, as the dry surface of the sandpaper is processed better and the dirt is not rubbing. When all the seams are cleaned, wipe them with a brush and remove the dust. After processing, they will look much careful.

When with the help of the above methods, it is impossible to remove dirt from the thicker seams, then most likely there is a fungus in the seams. In this case, act on such instructions:

To carry out an autopsy procedure, prepare a grinder or grinding.
From the room, remove the furniture if there is no such possibility - cover something, in order to avoid dust.
After that, it is necessary to cut down the grout layer.
Further wipe the surface with a damp cloth, removing dust.
Make a grinder of deeper channels.
If the grinding wheel cannot cope with some sites, apply large sandpaper.
Apply a solvent on the seams, treat the primer, and then cover the new grouting paste.

The interlocking seams are cleaned with the steam generator:

Type water to the apparatus tank, adhering to the instructions for using the steam generator.
Turn on the device and wait until the water is heated to the appropriate temperature. It should be close to 180 C.
Work, starting from the first angle. Spend a brush on the surface, then move on until you reach the opposite wall.
Then you need to turn around and process the next part of the floor.
Act thus to cleanse the entire surface.
After the end of the work, turn off the steam cleaner, and the tile wipe the mop or cloth to remove the residues of dirt and water.

After cleaning the seams of dirt, measures should be taken to protect against repeated contaminants. Now there are special fluids, which covering the intercine seams you protect them from the formation of plaque and contamination. This work requires accuracy, the substance is applied after drying the surface, with a small painting brush. You need to try that the liquid does not fall on the tile, otherwise it should be immediately removed with a clean dry napkin.

However, it is recommended to periodically wash the seams between the tiles (1 time per month) so that there is no need to clean them with a cardinal method. In addition, there is an alternative option - the painting of the seams using the moisture-resistant water-level paint, which is needed in several layers.