What is just not able to modern TVs - show a 3D image, play music and video from USB drives connected to them, work with various applications like Skype and easily master the Internet. But even the smartest copies of television equipment, for example, LG televisions need to be set up.
1
All search operations, connecting channel connecting and establishing an Internet connection is performed using the remote control. Teleranslation can be carried out through the antenna (today more often satellite), cable or via the Internet. To enter the settings menu, press the "MENU" or "SETTINGS" button on the remote control. For SMART TVs, click "Home" and then "Settings". Sometimes at this stage you need to enter a PIN code. If you did not change the standard code, try one of the following: 0000, 1111 or 1234.
2
Select "Options", then specify the language and country. Please note - to configure TVs from the date of release before 2010, you need to choose any of the countries of Western Europe (for example, Switzerland, Finland, Germany), but the language is changed to Russian. In newer TVs, you can specify Russia. Further go to the "Setup" menu - "Autopoysk".
3
If you have a digital or analog cable TV, specify the "cable" as a signal source. Select the search type (for example, "fast") and enter the necessary parameters - the type of modulation, the initial and final search frequency, flow rate, etc. This information should be provided by your telecommunication service provider. You can set additional search criteria: if you enable the "Digital only" function, exclusively digital channels will be found, without analog, and the "skirmish-encrypted program" feature is designed to filter the paid channels, which was not paid. Click "Run", and the configuration process will start.
4
To configure reception via satellite antenna, select "Antenna" - "Satellite" or "Satellite" in the "Autopoysk" menu. If you need, enter the PIN code. Open the "LNB settings", set the necessary parameters and configure the channels, guided by the transponder table (contains data for configuring the satellite receiver).
5
LG TV settings with SMART TV function are not limited to standard features. By connecting the "smart" TV to the Internet, you will get access to a variety of Internet applications, including the LG Apps portal. You will need a network cable that connects to the LAN port of the TV and the free port of the router, or the WiFi adapter for the USB port. Press the "Home" button, enter the Setup menu - "Network" - "Network Setup" and select the appropriate type - wired or wireless. Use the auto-tuning mode of the network or enter data manually, click "OK" - After checking these network, information about the current connection will appear on the screen, click Close.
6
Combine and install the applications required to view television programs using the Internet. This is the so-called IPTV - digital television that uses IP protocols to transmit data.
To view your favorite movies and television shows were pleasant, do not forget to adjust the color balance, contrast, brightness and other image parameters.
if I have in LG there is no Finland .. What country to put? + When you specify the country, it gives out the operator and there 2 blank ** 1- Any name 2- another operator ***
I constantly choose the country of Germany and the operator (which will offer)
1
9893
if I have in LG there is no Finland .. What country to put? + When you specify the country, it gives out the operator and there 2 blank ** 1- Any name 2- another operator ***
I constantly choose the country of Germany and the operator (which will offer)
The only site that is truth is useful as concerning the TV, thanks to help,
I really didn't say anything - only one BCS foresyat.
i can't customize the TV help