How to act when the brake failure

How to act when the brake failure

The brake failure is one of the most terrible driver's nightmares. In this situation it is very important to keep composure and try to stop the car. To cope with this nuisance, it is important to know several rules.

1
Enable the alarm so that other road users pay attention to the breakdown. Try to actively maneuver with the steering wheel and go around the obstacles. If possible, try to go to the most deserted section of the road. There you can take yourself in hand and you will have more time to stop the car.

2
Try several times hard and dramatically press the brake pedal. Sometimes this number is triggered from 5 or 6 times. If the brakes do not come back to normal, go to reduced transmissions and quickly release the clutch. Reduce gear gradually and quickly. This method must reduce the speed and stop the engine. You can also do the following. Turn off the ignition so as not to lock the steering wheel, and turn on the first transmission. After that, dramatically release the clutch. This method is likely to hurt the gearbox, but will save your life.

3
If the pedal suddenly failed, continue to put up until the stop. Modern cars have a brake system with a pair of contours. Most often refuses only one of them. Therefore, one contour will slow down the car noticeably worse, but in this situation it does not have to choose. Remember that the pedal can only be turned on from below, near the floor itself.

4
Try to take advantage of the manual brake, but be careful. If the speed is too big, the car can be strong or flick. You have to make a lot of effort to align the movement and go smoothly. After all, you need to hold one hand to hold the handbrake, and the other is to align the car. To do this, smoothly lift it up and hold in an uncomplated position. Turn the light lifters. Then, in case of driving, you can let him go.

5
If nothing helps, forget about the safety of the car and save yourself. Try to slow down the car with simple friction about the wall, borders or everything that comes on the way. The only thing is to try to choose smooth surfaces and control the convergence so that it is not too close. If you understand that the collision with another machine is inevitable, try to go to a fixed barrier.

Remember all the above tips and try to warn the failure of the brakes before the trip. Always inspect the pedals so that nothing has rolled out. Do not skimp on the brake fluid and never ignore the signals notifying the brake hose breakdown. High quality and timely take care of the car.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close