This owner knows how to save a family budget, so when the construction work is performed, an unstored board will choose. It is cheaper, but you have to bring it to the working condition. With this task is able to cope with electrourub. In the joinery workshop, such a tool is indispensable. Electric planer is a tool that is operating from electricity that smoothes a wooden surface.
The power tool device is quite simple: the engine starts to work, the rotating knife drum is activated. To choose a good model of the electrolablanka, it is necessary to familiarize yourself with the technical characteristics.
1
Power. This indicator is the most important when choosing this tool. Because when planing of a tree, it will be necessary to make every effort to achieve the desired result. Therefore, when choosing, you need to pay attention to the engine power indicators. And these numbers can vary from 0.5 to 2.2 kW. For example, the most popular Bosch electrician firm has the stated capacity of only 0.5 kW, and if you pay attention to other models, you can choose a power tool with a capacity of 2.2 kW. What does the power of the device mean? Suppose you need to handle several boards, then a low-power device can cope easily with this task. Another thing is when you need to process the batch of boards during the day, the device must work continuously. Naturally, power is in this case very important. For professional use, electroulacks with a power of 1 kW are intended.
2
What frequency rotates the drum? In this part of the power tools, sharpened knives are attached - this is the main "workhorse" of the electrolack. The result depends on the speed of rotation of the drums (number of revolutions). The number of contact with the knives with the treated surface is the frequency of revolutions. These numbers may be such: from 12 thousand to 18 thousand rotations per minute. This is the highest indicator. Choosing a decent assistant, we recommend that you choose your choice on models with a frequency of revolutions from 15 to 16 rpm.
3
Sole and its parameters. When buying an electrolyak, you need to pay attention to the sole: it should be smooth and smooth. If you are different vision, then notice the grooves on the sole - it should be. By the way, it is easier to not see them, but to feel tactile.
4
On the depth of planing and width. Relatively width - a modern electrical appliance is capable of covering the area from 82 to 110 mm. The more this indicator, the faster and better it will turn out to treat the surface. Planing depth - adjustable (step 0.1 mm), so you can always adjust the device to remove the desired wood layer. Pay attention to models with built-in depth grades, which shows the depth of planing during operations.
5
Is the electric tool weight important? It turns out yes and it can vary from 2.5 kg to 9-10 kg! Professional and powerful tool will weigh all 10 kg. And for home use, you can choose electrolaws weighing up to 4 kg with an average power.
6
For convenience, pay attention to the shape of the handle. To do this, hold the tool in your hand, try to slip the sole on the table.
7
Side limiter - if it is available, then it is thus you can perform work with maximum accuracy and adjust equilibrium.
8
The dust collector will become a real salvation, because when working with a tree in different directions, the chips are spawned, and the cloud of dust is formed around the workplace. So that this does not happen, we advise you to choose a model with a built-in garbage collection bag.
0
1259
