Jeans are the most demanded clothing among people of different ages and status. The secret of the popularity of Denim is in universality, because they are harmonized with various outlets of the wardrobe. But what if your favorite pair of jeans came into disrepair?
The reasons for which jeans are abrained between the legs
Every third lover of trousers from jeans sooner or later faces an annoying problem - this is a rapid wear of the fabric in the delicate area. This happens for such reasons:
- Nuances of the figure. If the volume of the hips exceeds the standard indicators, then the fabric is stretched. The wider thigh, the product is faster.
- Gait. Holders of special gait faced with a wiping of jeans between the legs. In such a situation, the load on the seam is increasing, which is gradually engaged.
- Material. If the fabric is thin, it is faster than wearing. If there is a polyester or elastane, this indicates the increased strength of the product.
- Evidence. If a person cannot sit quietly in one place, he starts to fool, and therefore, wipe the product.
If shov is sprawling
With the appearance of scuffs and sprawling, the seam must be performed these steps:
- First you need to strengthen the seam, because the pants at any time can crack. This can be done using a typewriter or manually using a secret welding machine. To do this, choose superproof threads intended for jeans.
- Then to shave the problem areas with a thread that is suitable in thickness and color. Pre-decompose trousers, fixing stitches on whole areas. Next horizontal movements go through the rubbed part. To the edge, which broke away, stick the thread and connect the vertical stitch.
- Perform the procedure must be carefully so as not to pull and pump the cloth.
- Then proceed to vertical stitches, a spinning needle between threads. Thus, it turns out weaving a new piece of fabric.
Patch between the leg
This method is suitable for losses on a small plane. In order not to form a hole, you need to strengthen the pants canvas. To do this, find a piece of suitable denim, glue or self-adhesive tape.
- Attach the thermolent to the rubbing area, to place a patch from above. The quality of the ribbon affects the durability of the product. From the laundry frequency also depends the service life of the patchwork. In order for it longer to keep needed to walk the stitches around the perimeter.
- You can still buy special pats from jeans, on one side of which the self-adhesive tape is attached.
- Repair work is carried out under the influence of heat from the iron. If the hole is too big, then the sock of the renovated product will deliver discomfort. This is due to a significant seal of tissue, therefore, it is practically not crushed and delivers inconvenience.
Appeal in Atelier
If you do not have sewing skills, you need to contact the studio. High-quality clothing repair can only be done by experienced cartridge. She exactly stepped out the seam that connects his pants using a sewing machine. If you decide to independently do the job, then for this thread of the same color for the fabric and the other for the stop.
Exclude rubbing
So that in the future it does not have to darken jeans manually or on a typewriter, contact the workshop, it is recommended to follow the following rules of socks.
All-fitting or too loose jeans are most susceptible to wear. Also, holes on the side of the inside of the thigh are formed by models with a low waist. Therefore, it is better to choose jeans of your size and not count on what they will stretch. Not all fabrics possess this property. It is important to carefully inspect the products so that there is no factory marriage.
Opinion expert
Experienced craters believe that the reason for wiping jeans are the shortcomings of contemporary models. The pattern of wedges for jeans should be performed on the oblique thread. This ensures the stretching of the fabric when moving, providing freedom of movement. But this method of sewing involves a large amount of tissue trimming. In order for the sewing process to become cheaper, the product is cut out in this direction of the thread, which does not imply stretching. As a result of constant load, the fabric flies very quickly.
An inexperienced buyer will not be able to identify the correct or irregular cut from the product. Therefore, the ideal option will be tailoring jeans to order, which provides a long-term warranty.
If none of the listed methods helped, you will have to go to the store for a new pair of trousers. Old jeans can be left for sewing useful things, such as tapes for hot, home or bags, or for repairing clothes.
0
361
