Ripped jeans are now at the peak of popularity, so many are trying to make their old pants fashionable. But what to do if your favorite thing is lost between the legs? In this article we will tell how to sew jeans.
Applique
Of course, the easiest way to make a piping of contrast fabric and decorate the place of gust rhinestones or pebbles. But childhood things can not be repaired, otherwise a small loss will soon turn into a huge hole. In the case of the baby's things, it is better to put appliqué on the hole and set it up several times. It is necessary that even a very curious crumble could not tear a cute bear from a pant.
How to repair men's jeans
Unfortunately, it is impossible to sew rods and stick rhinestones to such pants. It is necessary to make a hole as imperceptible as possible. To do this, you can sew a thing. This is a patch that is sewn from the wrong side, and the place of gust is clogged with threads. This method of repair is quite painstaking, but in the end you will be able to completely disguise the impulse.
At the very beginning, cut the loskoks a little larger than the hole. Try to approach exactly such a fabric. Perhaps you have trimmed after shortening the pants. On the reverse side, stick a patch. From the front side, step the place of the margins, the most approximate lines. As a result, the whole hole will be filled with threads. Keep in mind that the color of the thread must accurately coincide with the shade of Denim. Therefore, purchase several coils that differ slightly in color. Try to pave several lines on the trial area, and you can pick up the most suitable shade.
How to sew jeans between legs
To do this, you will have to spread the seam between the legs. From the wrong side, attach an adhesive gasket from knitwear and irrigate it. Thanks to the glue, the piece will stick to Denim and make the threads in the location of the impulse fixed. Next, cut a small piece of knitted fabric and glue it from the front side. This is done so that the fabric is no longer rubbed between the legs. Now take the flap of denim and cut it out on the shape of a hole. It is necessary that the rest of the fabric outlines the contours of the cut, which you are spacers.
Send a denim patch from the front side and step up the sewing machine. Until you cross the denim. In the places of layering of fabric in the seams manually wash the cuts. After all, the usual household typewriter will not cope with such a coarse job. Now you can connect the seams. Remember, such manipulations can be performed only on the old grandmother's foot machine or in the studio. Therefore, if you do not have such an instrument, contact the workshop.
How to sew jeans below
Usually, men rarely pay attention to the little things, so a shaggy edge appears at the bottom of the bottom. This is due to the fact that the pants are long. To repair, you need to cut off the row along the start of the shaggy edge, before that, do not forget to resort the scene. If you cut off the fringe, and there is no place left for new bending, do not be discouraged. Take the usual trouser tape (nice) blue and visiting from the wrong side. From the front side, sew the tape to remain the edge of 1-2 mm. Squake the nice close to the edge, pulling it out. Rent a place seam.
If you have never been involved in the repair of jeans, contact your sewing workshop or make shorts from them. You can do without a sewing machine.
0
2870
I really want to share the work of some masters with you. I somehow recently faced the problem of the rubbed pants, I don't know how to darge, and throw out a pity, I decided to contact the studio on tailoring and repairing clothes, they did everything better, now I wear with pleasure.