Than laundering the engine from oil

The car engine is the most important detail of any means of movement. And their owners are often asked about how to wash the engine. After all, his corps accumulates a lot of "side" products that affect the temperature of the engine, and therefore its work.

1

Engine cleaning rules

Wash the power unit is a rather complicated process. In order to do it yourself, you will need to buy something, namely the means for the engine (or shampoo for the car). Solar pollution can be removed with WD-40 to dissolve oil. Motor washing must be carried out according to the following rules:

• use hot water to facilitate the washing of the unit;
• eliminate sprayers and spray guns, liquid to apply a cloth;
• dissolve shampoo in water and apply to the motor;
• wash off with clean warm water;
• in case of unsatisfactory result, process contamination to the above WD-40;
• after time, wash the solution;
• wash out the dry rag of the power unit and give to dry.

2

Means for washing

To launder the engine from oil sediments, it is not enough to take a bucket with water and a brush, it is still necessary for this:

• Special fluids, such as Liqui Moly, Kenotek Globo, "Grass" Motor Cleaner, Motek and a number of others that facilitate the process. The diluted agent in the water is applied to the engine. After time, the dirt will begin to spread and drain the surface of the engine. It takes a brush to help the process.
• Callers. Special detergents that are sprayed (Brake and Clutch Cleaner). The method of cleaning is the same as the previous agent.
• Foam for washing.

3

Flushing ferry

In addition to the special liquids, oil can be laundered using steam exposure. The steam generator under compression produces couples on top of the motor spare parts. Pollutants are particles of dirt and oil. When heated and under the mechanical exposure, the jets are losing the basis and removed from the surface. This method is popular with owners of their own steam generator.

4

Engine cleaning in winter

At temperatures less than twelve degrees, it is not recommended to rinse the engine. In this case J.the idle can penetrate the microcracks and holes, then freeze. This will lead to an extension that can break the metal. Motor washing at low temperatures may disrupt the operation of the motor. Therefore, the procedure is better to carry out in warm conditions, such as a garage or car service.

5

Other methods of cleaning

If the deposition is soothed, then ordinary funds will not help. For this purpose, special installations are used supplying chemical compounds under pressure. But it can break the wiring and different elements, which will lead to the engine breakdown. Some drivers for cleansing are used kerosene. This tool may lead to the fact that after warming the motor from the surface, smoke may be highlighted.

It is better not to be used for washing gasoline, because it has a high probability of fire, and its pairs are explosive. There are drivers who successfully apply conventional detergents. But at the same time, the lumps or acids contained in the composition can harm plastic and rubber parts, and metal - oxidize.

6

Wash inside the engine

The world of the engine inside is under the influence of oil. And all pollution are departed in the oil crankcase, and sometimes enter the engine through the oil filter. Flushing the unit inside is carried out with the oil change. LUKOIL, HADO or FELIX is suitable as flushing oils. Old oil merges, flushing. Then include the engine at idle for 20 minutes, the special oil is drained and placed new.

If the oil changes regularly, then the engine is not necessary. The cooling system also needs to be washed using conventional and acidified water, as well as special means, such as "HiGear", BBF.

The market today offers a huge amount of special mixtures for washing the oil film. For this reason, it is better not to experiment and use them. Gels, foams, liquids, aerosols have certain rules for use that the manufacturer recommends.