Case for tablet do it yourself

Case for tablet do it yourself

The tablet is a thing that is used quite often in everyday life. And in order to save his presentable look for a long time, it is worth taking care of a case. At the same time, it is not necessary to buy an accessory, you can make it my own hands.



1
Materials for the manufacture of covers do it yourself

Before proceeding with work, you need to cook the necessary. In order to make a cover you will need:

  • fabric or leatherette, it is better to immediately measure the size of the tablet;
  • 2 cards, they should also be cut on the form of a tablet;
  • button and velcro;
  • elastic, it is better to choose the color of the future cover;
  • instant glue.

Directly for work with the above materials it will be useful:

  • stationery knife and scissors;
  • pencil or pen, it's easier to make marks on the billets where you should cut;
  • thread and needle.


2
We sew a tablet case with your own hands

Accessory manufacturing process:

  • Before starting to work, make sure that you are ready for the tablet with the flaps of fabric or skin, as well as cut 2 cards.
  • Now for each cardboard (you can use dense paper) stir up prepared fabric. Measure the small distance between the obtained parts, they should be similar to the book.

  • Then wrap the sticking edges of the fabric and generate them inside. Get the ends to the cardboard.
  • Take a few stripes of fabric and stick them to your coverage corners. Strips are better to do 10-15 cm long and no more than 1 cm in width.

  • Take an elastic band and with glue, attach to the case, they will fix the tablet. At this stage, take the device and encircle the case, try to fix it, check if it falls.
  • Cut a small piece of fabric and hide it where the cardboard is visible.

  • It remains only to flash the resulting case on the contour so that it does not break during use.
  • The last barcode is a fastener for accessory. Cut a small piece of fabric and glue it to one part of the cover, and attach the velcro to the other side.

Choose fabrics that will not quickly get dirty.

3
Retro Czech

If you want to make an accessory with your own hands, not because there is not enough funds to buy in the store, but because you want to distinguish yourself, then this option is suitable for you! To work, you will need:

  • a book that is a little more than your device (preferably by 2-3 cm);
  • brush;
  • ruler;
  • glue;
  • stationery knife;
  • elastic.

We begin to make the future retro case from the book:

  1. To begin with, using glue throughout the external perimeter, wake the pages of the closed book. In order not to stick the first and last sheets with the cover, put the leaflet.
  2. Find a heavy cargo and give a book, let her dry well.
  3. After approximately 2 hours, you can cut the place for the tablet, for this, on each side, give way the same distance.
  4. When you have an empty niche, it is again treated with pages glue.
  5. Turn over the book and at the end glue the gum, for this you can also cut holes so that it fits tightly. Rubber will support the tablet.
  6. The closed book can also be recorded with a rubber band.

When choosing the materials, repel from the usual materials and forms, make your cover unique and unusual.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close