Lingerie - exhausting occupation, it is necessary to acquire a high-quality and comfortable ironing board to relieve it. Even the most expensive iron is difficult to iron underwear on the table or on the floor. To save power and time, choose the right ironing board.
1
When choosing this product, pay attention to the basic material. It can be made of plywood or metal. Metal models weigh less wooden analogues. In addition, there are end-to-end holes on the surface of a thin metal sheet, which makes it easier to laundry. Do not worry, despite the small thickness, metal bases are equipped with rigidity ribs that reliably fix the surface of the board. Wooden models from the constant exposure of moisture and temperature can be deformed. After that, it is quite difficult to smooth men's trousers or shirt.
2
The length of the ironing board may vary within 120-140 cm. Do not rush to buy the biggest board. Pay attention to the width of the product. It is best to purchase a model with a thickness of 40 cm. Thickest deliveries a lot of trouble during ironing, as clothes have to shift many times, which worsens the quality of work.
3
Cheap models are equipped with cotton covers that are losing color over time. Purchase more expensive product covered with a special cloth. It does not learn and does not fade when exposed to high temperatures and steam. Case must be removable. In this case, it can be woven. If the case is fixed on a wooden basis with the help of a bracket, you will have to remove them and consolidate the new upholstery by a construction stapler.
4
There are two kinds of feet. When folded, they can be wider framework or have it. Enjoy stability and do not want to board staggered during ironing? Then purchase a product with wide legs. But if you store the ironing board in the closet and you have the value of its length, buy construction with short legs. It is compact, but less stable.
5
Modern ironing boards are equipped with additional covers and extenders. This allows you to install the product in any part of the apartment, regardless of the location of the outlets. The board must be equipped with a special shelf for iron. Some manufacturers of inexpensive models complement their hooks. Such holder unreliable and can cause the fall of the iron. If there is a child, then the iron should be on the shelf, rather than hanging on the hook. Facilitates ironing nozzle sleeves. This is a small item, fixed on a metal base that is attached to the base. The sleeve fits over the nozzle, allowing the fine stroke men's shirt without arrows.
6
The legs of the ironing board must be "shod". Typically, this attachment of rubber or plastic. They give the product stability during operation. To board did not go from side to side, all items must be well secured. That is why give up buying the product, connected by rivets. Reliable model, assembled with bolts. Even if the board a little bit cranky, you can tighten the screws.
Pay attention to the possibility of height adjustment. It can be carried out using the stairs or moving technology. Steps reliably fix the product, but the sliding legs have more provisions that allow to choose the desired height. In continuous operation board with sliding legs can be folded independently, so buy a model with steps.
0
3032
