Presentable appearance and excellent car body efficiency is provided by regular preventive care. Implementation of simple recommendations will save a lot of money on cosmetic and overhaul of the body. The correct maintenance of the car avoids problems such as corrosion, damage to the paintwork, disruption of the performance of individual parts.
1
At the head of all activities to care for the body, there is a regular washing, before conducting well to clean the holes of the wings, thresholds and doors intended for drain, as well as ventilation holes.
2
Washing paintwork and glasses has its own rules:
It is impossible to allow a large amount of water and air temperature to avoid cracking the upper coating layer.
If the surface is badly contaminated, then it should be moistened to be moistened to twist the dirt.
The best option for washing is the use of the hose with the middle pressure.
To avoid the altitude of fluid on the door seals, you should refuse to wash the car in frosty weather.
The best tool is a car shut-off, which can fight penetrating, mixed aggressive layer.
It is forbidden to use abrasive cleaning substances.
3
An important event to prevent car corrosion is the bottom of the bottom and wheeled arches. The best option is to be processed by steam, which is carried out only in car service. At the same time, it is necessary to inspect the bottoms for the presence of damage and faults. Alone, the bottom washing is carried out using special degreasing solvents that are applied with a brush, and then washed away with strong water pressure. If there is a layer of wax, then it is pre-removed, and after degreasing processing and drying are applied new.
4
Application of wax and polymeric disapprosive polyterols on the paint and varnish surface and glass provides reliable protection against moisture, temperature, various chemicals. Polyrols, pasta, sprays reduce surface contact with the environment, filling all microcracks and creating a protective layer. Also similar processing provides a beautiful sparkling appearance. Polymer polyters are more durable, but also more expensive compared to wax. Metallized surfaces are also processed by special abrasive cleaners and polyrollas.
5
Special attention deserves care for the engine, trunk, there is also a lot of special means. For the normal performance of various mechanisms (lock wells, fuel tank hinges, door loops, door opening limiters, etc.) they must be treated with special means and lubricants every 15-20 thousand kilometers.
6
Installation of inexpensive liners will protect the inner surface of the wings from various contaminants. Checking rubber seals and their replacement in case of damage will ensure the tightness of the cabin, warning the penetration of moisture, exhaust gases.
To extend the service life of the body, complete anti-corrosion processing should be performed. It can be done on your own, applying mastic. However, more qualitatively, such events are carried out at maintenance stations through the use of special high-pressure equipment.
0
4945
