Do you like to give gifts? Then you have often to pack them. Of course, it is easier to buy a festive package for the box and put it to other gifts. But most of all remember the presents with the original packaging, which can be made with their own hands.
How to pack in gift paper Box standard size
To pack a single gift from you, you will not need a special skill. If you are clearly followed by step-by-step instructions, then you will complete it quickly.
Prepare such materials and tools:
- packaging paper;
- double-sided tape;
- scissors.
Package:
- Calculate the paper size you want to use for packaging. This can be done by such a formula. The width of the sheet of paper will be equal to the sum of the length and height of the box, which multiply by 1.5. To define the length, measure the double width and height of the box, fold together, then add 4 cm to the amount.
- Place a gift from the back of the paper according to the size. Top on the cardboard along the entire length, glue the scotch strip. Remove the protective layer from it.
- Get the short edge of the paper to the cardboard. Press the Scotch at the site so that the package fits tightly to the cardboard. Press your fingers of the fold line.
- Wrap up the opposite edge of the paper for 2 cm. Stick across the scotch fold line, remove the tape.
Tense tighten the packaging around the present, install the paper on the box cover and take it the edge, as shown in the photo.
- Now wrap the side pieces of packaging. To do this, first start the paper from above, bring all the resulting bends. Glue tape from above.
- Alternately fix the corners of the paper on the cardboard.
- On the sides of the triangle, which turned out, apply two-way tape.
- Then pin the triangle tightly to the box. All actions repeat on the other side.
- Top decorate a gift bow and packaging ribbons.
How to pack in gift paper Box round size
Round shape gifts to pack enough problematic, but perhaps. The next way to decorate the box, you use a minimum of paper and decor.
For round packaging, you will need:
- paper with drawing;
- hole punch, scissors, stapler;
- glue pistol;
- cardboard circle;
- ribbon or twine.
Package:
- Measure the height of the box and diameter. Size cut the rectangle, whose height will correspond to the height of the gift, multiplied by 1.5; And the length of the figure is diameter. Cut the paper strips width no more than 3 cm.
- From one narrow edge of the strip, make one hole with a hole panel. Get their other side to the cardboard in a circle. You got a round fan of the stripes. Wait until the glue dries.
- Place the gift at the center of the figure. Cut the tape and thread through the holes of the strips. To do this, gradually bend strips to the middle of a circle, tightly tightening the tape.
- When you sell the last strip, tie a ribbon knot. So you will collect all the blanks together, and they will not break. Excess the tape cut. Nodules Hide a bow that makes from the remains of the tape.
How to pack in gift paper Long shape box
Narrow and long gifts can be wrapped as standard, but much more interesting to make packaging in the form of a large candy.
Packing materials:
- corrugated paper;
- scissors, transparent tape;
- decorative tape.
- Cut the colored paper in the form of a long rectangle, where its length will be equal to the double length of the box. The height of the figure will be a double amount of the width and height of the gift. Add 3 cm for snaps.
- Place a gift in the center of the parchment and wrap it around. Cut paper Lock on cardboard transparent tape.
- On each side, drive the paper with a segment of a decorative ribbon. If you wish, make curls with the help of the sharp edge of the scissors.
- Excess Parchment Cut on the edges of the packaging.
- Decorate the top of the gift by any decor.
How to pack in gift paper Box non-standard size
Sometimes the presents have a non-standard form. Their packaging is not as complicated, as it will seem at first glance. Take:
- packaging paper of two types;
- scissors;
- glue pistol;
- double-sided tape;
- decor.
Package:
- Non-standard gift Wrap in a subtle parchment. You can do without this action, but so you will smooth the corners from the box. Cut a small piece of wrapping paper depending on the size of the box. Place the box from one edge. From this side, glue the tape.
- Block tighten the paper in a circle. On the one hand, press the sections of the packaging and slightly swing the folds. Wrap the edge several times to the center and secure glue.
- Press the packaging well so that the glue is completely frozen.
- Roll into the same way as the other side of the packaging, but at a right angle to another edge of the packaging. So you will have a bulk triangle.
- Decorate the packaging by any decor.
Give gifts is a whole art. It is easy to explore if you follow such simple master classes. Now your presents will always be original and remember among many other things.
Another three ways to pack the boxes Look at the video:
0
1485
