When buying a favorite clock, people often face the fact that the bracelet does not suit them in size, i.e. is great. In this case, you can remove several links and adjust any watches under your wrist. In this article, we will look at two ways to reduce the strap. The first is suitable for almost all hours with a metal bracelet. The second is designed for a pulling bracelet.
1
Before starting, bring the workplace in order and cover it with paper. You will need:
Thin sequel or other pointed object;
A small hammer;
Boxes for details;
Pliers;
Screwdriver.
2
Standard method. Put the clock on your hand in the position in which you are going to wear them. Then turn it so that the wrist and the fastener watched up. As a bracelet links in such a way that a suitable length is formed. When he perfectly grabs his hand, stop. Make sure that the links (excluding hanging) come into contact. If you find it difficult to decide, delete one link first. You can remove others with ease, and add them back will be more complicated. It is preferable to remove the even number of segments (one on each side) so that the fastener is preserved in the center of the bracelet. Before shooting segments, separate the bracelet from the clock. On the clasp that bonds them, there are rods on both sides. With the help of a thin sequel or other pointed item, carefully squeeze them out of the fastener. Be extremely careful that they do not fall out on the floor and not lost.
3
Then select the link you want to delete. Take the sequel again and squeeze the rod by 2-3 mm, which fastens the selected link. Strongly get out of hand or pliers. Do the same actions with the second rod and then with other links you want to delete. Extracted parts fold into the cooked box. If the links are fixed with cogs, use 1 mm screwdriver.
4
In some models of hours, as well as in copies of hours cheap Purchased, there are tips of metal. They are located in the center of the links of the links and are removed along with the rods. Watch that they do not jumped into the floor. When all the necessary links are removed, proceed to the assembly of the bracelet. Perform all actions in the reverse order. First, insert the rod extracted from the links. If necessary, take them with a hammer. If there were tips in the clock, place them in the center of the links. At the end of the work, connect the resulting bracelet with a clock. To do this, insert the rods that fastened them.
5
Synod a clock. If you are all done correctly, they will be perfectly wrapped your hand. If you feel that the clock is Velice - repeat the procedure again. If they are small, some links will have to add. Do not throw out the remaining details after work. They can serve you a good service in the future.
6
Method for clock with a drawn bracelet. As in the previous case, measure the length of the strap. Calculate how many links need to be removed. Remove the clock and place them on the workplace. In the end of the bracelet there are sections of the upper torsion brackets. Bend the part you want to take off. Then turn the clock and disconnect the lower torsion brackets. Remove the section by extending the selected part. After that, it remains only to collect a bracelet. To do this, simultaneously secure the brackets on both sides of the bracelet. Then snap the torsion pipes back. Everything is ready!
The procedure for reducing the bracelet is simple, but it is important to perform actions carefully and consistently so as not to damage the clock and your hands. Follow the instructions - and everything will turn out!
Share advice:"How to shorten the bracelet on the clock"
1
3670
