To date, the smartphone has every modern man who keeps up with the times. A neat user of this gadget will surely protect the screen of his phone with protective glass or film, immediately reducing the risk of glass damage. It often happens that when the protective film is glued, the air falls under it and air bubbles are formed - and this is not an ideal look. Let's discuss today how to get rid of such a "defect" and what methods for this have.
Removal of air from under the film
Since we use gadgets every day and more than once, it means that everyone we do a lot of movements with your phone - get out of your pocket to the backpack, shift in your pocket, etc. It turns out that the probability of scratching or dropping this subject is actually large enough. It is in order to warn the phone from defects and glue the film to the screen. Today, this protective segment can be purchased in a specialized store or order on the Internet.
It should be noted that you can also glue the protective film on the screen by two methods:
- With your own hands (after reading the instructions in some source or watching a video lesson about this).
- Call for help from a specialist who will help you in this very quickly and make it all better.
- It is necessary to understand that replacing the screen in the event of a breakdown of the old (dropped, cracked, broke, etc.) the pleasure is not cheap, so it's easier to buy a protective film than then change the screen.
Methods of air removal
If it happened so that you decided to stick the film on the screen of your gadget yourself and ultimately got not at all what they wanted and on the screen of your phone there are air bubbles under the film, then you will have to get acquainted with the information that will be useful for eliminating such Outlook:
- In the current situation, the assistant will be able to become the easiest piece of plastic (it should be mandatory smooth and smooth in order not to deform the film and glass). Here you can apply your salary or credit card. Just spend it on the o'clock from the bottom up or vice versa, thereby driving air bubbles from under the film, which were formed there as a result of self-mounting it to the gadget screen.
- If the first method did not help you or simply did not come to you, then you can try the next one, namely, take a needle in your hands (it can every one can at home). After that, pry it very carefully the edge of the glued film (in places where there are bubbles). When the air comes out of all parts of the film, carefully pressing it with effort back to the screen.
- The following method will get rid of bubbles - this is used for these purposes a typical hairdryer. What you need to do is just turn on the hair dryer to the mode not a high temperature (so that the air is warm, but not hot) and warm your phone. In this case, you need to do everything very carefully. None can not be too close to bring the hair dryer to the screen so that it does not melt and not deform. The distance from the hair dryer to the smartphone should be at least 30 cm. After you brew a little screen of the phone immediately put a stack of several books on it. After about 5 hours, you can remove the stack of books and enjoy the result. It is clear that some such a way will not fit, because without a smartphone, not every modern man ishes such a matter of time.
- If the number of bubbles on the screen of your smartphone under the film is too large, then here you will need to apply radical methods. It should be understood that in this case the user will have to implement a complete dismantling of the film. You shoot the film from the screen, and then stick it back. It is clear that this method is not always practical, because the second time to glue the film on the screen is not always successful (it should be borne in mind). Some experts argue that it is possible to glue a qualitatively film only, so that such a method is not always valid.
Useful advice
Despite the fact that it seems that each of the proposed methods is very simple. In fact, everyone needs to be used carefully, so as not to harm the phone. Everything should be sterile, smooth, correctly selected.
It is also necessary to understand that the choice of the right room for the procedure under consideration also affects the final result. It will be advisable to choose to remove air bubbles from under the films to the bathroom, because the dust there is a minimum amount, but the humidity is increased (which is the cause of a small amount of dust).
Remember that excessive effort during this process also can negatively affect the integrity of your smartphone. The main thing is in this case not to hurry and be extremely careful.
In order for this kind of problem, it is not at all, it is necessary to initially devote the proportion of the protective film to the phone's screen due attention and do everything very carefully. Prevention of such a problem - the first time paste protection correctly and perfectly. In order for you to do this, you need to follow the following rules:
- At first before sticking to the screen to the screen, it must be carefully witching from various kinds of pollution and necessarily the entire surface to be deguted.
- Do not touch your hands the protective film from the other side that you will be glued to the screen.
Everything is simple, if you do everything slowly, confidently and focused.
2
747
