How to erase polyester?

Popular synthetic material - polyester - widespread as in the sewing of clothes items and the manufacture of furniture items. Polyester fibers are made from active material unpretentious care, they have the high performance and good durability. However, even this unpretentious fabric like polyester requires care. How to remove contamination from the material?

1
General handling of polyester

The main guideline to be followed when washing items made of polyester (and any other material), is the information from the label to the product. On it the manufacturer specifies all the features that need to be taken into account when processing the material by various chemical compounds.

It should highlight the general recommendations that should be followed always when working with polyester:

Material categorically "fear" hot water, especially hot water. As a result, a thing can not only significantly decrease in size, but also turn yellow. Optimum temperature - 20-30 ° C (40 ° C).
If item polyester has no obvious contaminants and it is only required to "refresh" may be used and cold water (10-15 ° C). The quality of the wash and condition of the product is not affected. The only caveat - make sure powder is completely dissolved.
Bleach, especially which includes chlorine is also not recommended for treatment of polyester fibers. Such substances which is valid only when working with cotton fabrics.
During drying polyester, avoid direct sunlight. The latter can damage the structure of the material.

2
Hand wash products made of polyester

This type of washing with the most preferred polyester cleaning of stains and dirt. Delicate exposure will keep the structure of the material and appearance of the product.

Pour into a warm water container.
Add and dissolve a suitable powder. Preferably, if it is a liquid detergent, since it is faster and easier to dissolve. Undissolved powder granules can leave streaks or smears on clothes.
You can use a universal powder for white and light colored fabric. Dark or colored polyester is better to wash with tools for non-ferrous materials.
Put the product in the resulting solution and leave for 30 minutes. Further possible to further lightly rubbed over the contaminated areas, if necessary. Although polyester fibers sufficiently resistant to mechanical stress, excessive rubbing cloth is not worth it.
Thoroughly rinse the product, until the water runs clear.
Gently press thing and allow to drain excess water. If you washed jacket or other garments made of polyester, the product is not pressing, but just hang on a hanger.

3
Machine washable polyester products

Not all things are made of polyester machine washable. If the label is not the relevant restrictions, the sequence of actions is as follows:

Put the product in the drum and the set mode is "delicate" or "Handwash".
wash temperature is set again on the basis of information from the label, most often it is 30-40 ° C.
The final spin can and does turn off or set to not more than 600 rpm.
When washing things from polyester fibers is recommended to use fabric softener. This material is not only make the material pleasant to the touch, but also significantly reduce its electrostatic property (tissue will not electrified).

4
Removing stains from polyester

Apply the stain remover on pollution sensitive action and leave the thing for a while.
Further gently rub the fabric portion with the stain, and resort to the classical washing.
If a stain remover has not coped with the task, try one of the following compounds:

Abundantly sprinkle table salt contamination site. Through time, rinse the product.
Prepare a solution of borax (10%). Moisten a cotton pad means and wipe them a spot. Next, place 1 tsp lemon juice in a glass of water and treat the resulting solution contamination. Polyester Rinse in cold water.

5
Drying of polyester

Polyester fibers dry quickly, so the need for a strong push-ups (as during hand or machine washing at) no. It is enough to gently squeeze the product and hang it in the dryer or on a hanger in the room or on the street. Such a process avoids subsequent drying ironing product. If the need for the latter is still there, use as a layer between the polyester and the sole plate wet material.