Often situations occur when the television antenna does not work. At such moments there is a feeling that the world may stop without television. But everything has a solution - you can make an antenna and at home. Let's see how to do it.
1
Of course, an antenna, made with your own hands, is an alternative for special occasions. For example, you removed the apartment in someone else's city and there were problems with television, or temporarily there is no funds for purchase. The appearance of such a device is not ideal, but in this case more interests the quality and the final result.
In order to make an antenna, you can not do without:
Two empty beer cans;
Wooden trempel;
Tape;
Bugs;
Soldering clothes;
Tin;
A piece of cable (up to 5 meters);
Stationery knife.
2
Prepare a television cable of the desired size: to be the length of the room to the balcony (windows). On the one hand, do not carefully make an incision of a soft shell at about 10 cm long, without damaging the cable itself. Copper screen swept into one thick wire. Silver material (like foil) tighten manually. From the opposite side, leave a place under the plug for connecting to the TV.
3
Take 2 empty beer banks, thoroughly wash them thoroughly and dry. Make them holes in them the same diameter on the sides. The size of the cans can be both 0.5 liters and 0.75 liters - it does not matter. Using a clop, attach the middle of the cable and the screen on the jars on different sides. The complexity here in the strength of the joining cans. As a rule, tape is short-lived, and the screws will not be screwed. Therefore, a slightly different procedure is used here.
4
Attach in advance prepared jars with a tape on the wooden trempel. At the same time, they should be on the same plane. If the container can be 0.75 l, then the distance between them should be at least 75 mm. If the quality of television broadcast is not particularly good, you can move the cans from each other by selecting the optimal option. Sometimes 0.5 liters have to move them to more than 75 mm, so act in terms of the situation. If you are creating an antenna on the street (for example, outside the window or an unlocked balcony), for the strength of the design, we do with tin cans.
5
Now you have to attach the plug to the TV. Select the location you want and try to configure the channels. Remember: the longer and thicker cable, the better and clearer playback. In your location there will be integer 7 channels, pleasant viewing!
6
Problems also arise from car drivers when the antenna breaks. After all, without a favorite radio station is completely boring. To make an antenna for an ambulance hand, you will need only metal pins. Connect them into one thick cord with a copper coil from above. Welcome to a homemade sphere a piece of metal for mounting to the car body. At the top of the pin antenna, attach a small cap, it will serve as a radio receiver. It is to him that attach the carburetor cords of the carburetor through the insane salon. Turn on the radio and check if there is sound through the speakers. If nothing happens, you need to reconsider all the fastenings of the wires, if necessary, re-conducted isolation.
There are no hopeless situations, so if you broke the antenna - do not worry, but make it yourself. At the same time, you will spend the minimum of cost and time. If you do everything right according to the instructions described above, you will watch your favorite TV series after an hour!
0
1675
