Every amateur listening to music in the headphones came across such a problem as their breakdown. It is enough to buy constantly new ones. There are two options out of this situation: the first - stop listening to your favorite compositions on a convenient portable device, the second (the most optimal) is to collect headphones with your own hands from the remaining old instances. For this you will need:
broken headphones;
thin scissors;
soldering iron;
insulating tape.
1
Often it breaks only one earphone from the pair, therefore, the second will be whole. If you attach a little effort, you can collect your own. In the case of a frightened cable, it turns out to change the main plug to the new one.
2
Use thin scissors to remove the plastic part from the plug. Remember the location of the wires when cleaning the plug from plastics. At the end of cleaning, solder the wires to the plug connectors. Note that the wires of the same color should be saved. By the way, the signal will be transmitted much worse if the wires are twisted.
3
When breakdown inside the headphone, it is possible to replace it from another broken pair (where the headphone needs for you). Shipping wires that have left the dynamics, just enough. The main thing is not to confuse the right and left speaker when replacing. It is desirable that the sting of the soldering iron is less in diameter, because then its output power will be less.
At the end of the headphone assembly, you can only check their quality on any musical device. You can not use when cleaning detergents containing alcohol, as they can damage the case.
0
2571
