Automotive tires are an extremely important element of a car configuration, since it depends on the correspondence of the car declared characteristics and your safety on the road. For example, a car clearance, speedometer, car suspension stiffness, suspension load, will depend on the wheel size of the wheels. So to move from the sizes declared by the manufacturer with all caution. To begin with, examine the issue of calculating wheels for the car.
Before purchasing new car tires, inspect the regular wheels and decide with the tire size size. On the side of the wheel you will see the numbers and letters of the form: 195/65R15. The first digits are the width of the tire, 65 is its profile, it is indicated as a percentage of width, R is radial marking, and 15 - disk diameter. Moreover, the width of the tire goes in millimeters, and the diameter of the disk in inches. If you have doubts that you bought a car on native rubber, it is better to refer to the specified numbers with the car documentation. If the sizes of tires suitable for your car are not available, you can replace it with another. It is important to remember that the deviation from physical dimensions should not exceed 20% in width and only 5% in diameter. With an increase in the diameter of the disk, you will have to reduce the height of the bus profile, and, as a result, the suspension load will increase, and the comfort of the car will decrease. If you need to enlarge the bus profile, the wheels can start cling the body and suspension and can provoke its damage.The easiest way to change the tires in specialized automotive centers, here you will pick up your own size, or replace it with a similar one, which will ensure compliance with all the chalches of the car. And you will be confident in the reliability of the car behavior on the road, your own security and comfort.