Despite its small size, the castle on a luggage bag or a suitcase can give you peace of mind. It prevents unauthorized access and stealing your personal belongings. Each bag model has its own combination of digits by default, as a rule, this is 0-0-0-0, but each user can change it at any time.
Different models of suitcases have different locking locks: lever, push-button or mounted under zipper.
How to change the code on the suitcase on the lever lock?
- Close the suitcase or portfolio. Find a small lever on your luggage castle. It can be located on the outside next to the dial or on the inside of the castle.
- Configure the factory combination of default lock. Install on the dial "0-0-0-0" if it contains only three digits, set to "0-0-0".
- Press and hold the small button located next to the dial. Some bags have a lever next to the dial, which should be clicked and lowering down or to the side as possible.
- After the lever was moved to the "Code Settings" position, turn each disk by selecting the desired figure.
- After setting up a new combination, move the small lever on the lock back from the "Code Settings" position to its original position. The code lock is now dropped and you can use a new combination to open a suitcase.
How to change the code on the suitcase on the push button lock
- Unlock the bag using the factory combination (0-0-0).
- Select a new combination. Press and hold the button while rotate the discs.
- After the selected combination of numbers, release the button. Place the lightning in the slots locks, twice checking that your new combination is installed.
Change the code on the suitcase on the mounted castle
- Enter the factory combination of your lock.
- Pull out one hand of the Castoda Castle.
- Turn the lever at an angle of 90 degrees, and then press and hold it on the spot.
- Enter a new desired combination.
- Release the lever and place it in the "closed" position.
- Turn the dial around several times, and then enter a new combination to check the lock.
0
789
